Byron

Hey Spectre fans where are you guys? Who's got what out there are what speeds are you running with what type of power?

shawn

Just got a 1999 36 with 500 carbs runs 102 with a 5 blade hydromotive. What is the stock prop Jay sells with the 500 package?

shawn

I ran 29 4 blade Hydromotives on my 30 with 500s and ran 5150-5200 rpm. They would not work for your 575s. The five blades are smooth, but you should just check with Jay at Spectre he has more test time than anyone. He really is a great guy, he has always taken the time to answer my questions.
Good luck, I loved my 30, it was fast and nimble


Shawn

LambRB

Building my 1999 30' Spectre with Imco extreme sc and whipples! Can't wait to see what it will run! Imco's should be here soon. I'm going to put them on first and then the whipples.

Where are some of you guys from?

Where any of you at the Cumberland Poker run in 2002?

Sonny Spectre 30

I was there last year.

Sonny Spectre 30

I have 29 and 30 Hydromotive 4 blades for sale. Send me a PM if interested.

Have stock 500 HP EFI's. Just changed lowers to Merc Sportmasters and picked up 10 MPH. Runs 111 on 36" Bravo 1
4 blades.

shawn

Sonny, how have your mods been going? Is everything done? Hope you have a good season.

shawn

LambRB

I go there about 2 times a year. That is probably all I'll make it this year. I'm in Bellefontaine Ohio. It takes about 6 hours to get there. Not to bad, but a lot of my buddies can't get off for work long enough to justify the trip.

Do any of you boat on Lake Erie? I plan on doing most of my boating there this year. It is a hour and 45 minutes from me.

Sonny Spectre 30

Everything is done. I plan to run the boat this weekend. I'll let you know how it does here.

shawn

Does anyone have the dimension of a tab on the 36. I have too much machine time open that I want to make my own.

thanks
Shawn