How to use factory installed flush kit
I considered posting this in general q & a, but since it appears to be a factory option, I thought I'd ask the sunsation crowd.
The warning tag on each engine says not to run the motors while on the hose. Well, I hooked one up and it just seemed to flush the drive out, not the risers and the pipes. I wasn't confident that I was flushing everything so I aborted and went to the muffs on the outdrive and fired it up for 5 or 10 minutes. Any clarification on what the proper procedure is here and whether or not everything actually gets flushed properly just using the flush kit connection? Thanks, John |
John,
Call Barrie at the factory. He will talk you through it. |
All times are GMT -5. The time now is 08:01 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.