Question for Sunsation Factory
1 Attachment(s)
Hello,
I have been looking at the 288 Closed Bow for sometime, it's definately on my list. I have noticed that the trim tabs are mounted somewhat closer to the outdrive than most other installations I have seen. What is the net effect of having this placement? Thx! |
Originally Posted by Scarab22-1998
(Post 2308544)
Hello,
I have been looking at the 288 Closed Bow for sometime, it's definately on my list. I have noticed that the trim tabs are mounted somewhat closer to the outdrive than most other installations I have seen. What is the net effect of having this placement? Thx! |
I would suspect due to when running on plane especially on smooth water the boat sits high enough to have the tabs further out would render them somewhat ineffective. The higher the boat rises runs out of water (= speed) the closer to the center the planse need to be. Plus since they are 280 K-planes (too much for a single 28 application in my opinion) where a lot of tab is available to contact water, it exacerbates the situation....Just my casual observer opinion.
|
Originally Posted by Reckless32
(Post 2310228)
I would suspect due to when running on plane especially on smooth water the boat sits high enough to have the tabs further out would render them somewhat ineffective. The higher the boat rises runs out of water (= speed) the closer to the center the planse need to be. Plus since they are 280 K-planes (too much for a single 28 application in my opinion) where a lot of tab is available to contact water, it exacerbates the situation....Just my casual observer opinion.
|
All times are GMT -5. The time now is 04:05 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.