Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Sunsation (https://www.offshoreonly.com/forums/sunsation-43/)
-   -   2005 Dominator SS (https://www.offshoreonly.com/forums/sunsation/302537-2005-dominator-ss.html)

MILLERIME 09-06-2013 01:03 PM

I will post pictures of the boat, damage to the drive and the after on the tabs tonight when I get home from work. My mechanic took them to a machine shop and had them cut down then re-powder coated the tabs. It looks factory fresh.

PowerplayJ

I know the boat you are talking about with the windshield and purples lightning graphics. The one I bought was purchased from a repo auction in Greenville South Carolina. I did some research and it was a one owner boat out of Georgia. I am in sub-prime lending and have some awesome skip-tracing software. The guy who it was repo'd from out of Georgia never would return my calls. My mechanic went through the boat for me. There are some cosmetic issue's but mechanically very sound. Little things like a broken speaker grill, missing a couple cup holders, stereo is pieced together, but overall a great deal. The boat was only about an hour from my house. Living in South Carolina most Sunny's are in the north. I had a horrible experience flying to a very well known boat dealer in the northern part of the country, so the boat being so close I had to jump on it.

Knot 4 Me 09-06-2013 01:18 PM

1 Attachment(s)

Originally Posted by boatnt (Post 3989589)
why not notch the tab at the factory like this guys mechanic did?,,,,I have done it in the past and so have other boat builders,,,
not trying to take anything away from Joe or the sunny group,,,just saying

Looks like Reggie needs to notch his swim ladders! I can hear Chevy as I'm backing down the ladder. "Using the whole fist, Doc?" :cartman:

POWERPLAY J 09-06-2013 02:57 PM

Cool! Hope ya got a good deal. Not many windshield boats out there. Give Joe a ring at the factory and give him your HIN, get info and on the mailer. They are good folks to deal with.

Scagburner 09-06-2013 03:18 PM

http://www.ggschmitt.com/

Look at the third ladder down. this is what came from the factory on my SSR.

Sunrocket24 09-06-2013 08:38 PM


Originally Posted by boatnt (Post 3989589)
why not notch the tab at the factory like this guys mechanic did?,,,,I have done it in the past and so have other boat builders,,,
not trying to take anything away from Joe or the sunny group,,,just saying

I hear you on that but who puts their drives in trailer position when they are hard port or starboard? I have a single but make sure my drive is center before I put it in the trailer position.

AJ POWERPLAY 09-06-2013 09:12 PM

Tom puts his boat in trailer mode to get that little extra trim he needs to reach top speed!!

boatnt 09-06-2013 10:22 PM

1 Attachment(s)

Originally Posted by Knot 4 Me (Post 3989644)
Looks like Reggie needs to notch his swim ladders! I can hear Chevy as I'm backing down the ladder. "Using the whole fist, Doc?" :cartman:

Hey we ALL know Reggie does not know anything about boats,,,,I mean look at the guys failed attempts at all the speed records.lol

by the way what do you think Chevy is saying while he is backing down the ladder of a F4? using both fist Doc?lol

if you look closely you can see the tabs notched on the F4,,,so why not on the 32??

boatnt 09-06-2013 10:23 PM


Originally Posted by ajfisher (Post 3989818)
Tom puts his boat in trailer mode to get that little extra trim he needs to reach top speed!!

Thanks AJ,,,you and the sunny guys still go out for drinks??

LAriverratt 09-07-2013 07:29 AM


Originally Posted by Scagburner (Post 3989699)
http://www.ggschmitt.com/

Look at the third ladder down. this is what came from the factory on my SSR.

yep same as mine...everthing else on our boats seem to be just about the same too:cartman::lolhit:

POWERPLAY J 09-07-2013 08:37 AM


Originally Posted by Sunrocket24 (Post 3989805)
I hear you on that but who puts their drives in trailer position when they are hard port or starboard? I have a single but make sure my drive is center before I put it in the trailer position.

Trailer mode? Mine are centered and all the way down when I pull out of the water. :drink:


All times are GMT -5. The time now is 05:06 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.