Blueprinting
 

Has anybody ever blueprinted the bottom of a 2006 or older 32 Dominator and if so, what were the results? Has anybody ever had any negative experiences with blueprinting a bottom?

There is a 3/16" hook incorporated into the bottom of the older Dominator's and it is there for a reason. If yours is a single engine Dominator then remove the hook, otherwise I would leave the bottom alone since the strakes and transom are very sharp from the factory.

Thanks for the reply.

I have a question though. I thought the hook is what blueprinting removes. This would give a true flat pad for the boat to run on giving less resistance and more speed.

As mentioned in a reply to your previous thread about the same subject, just call the factory and talk to Wayne or Joe.
http://www.offshoreonly.com/forums/g...ed-bottom.html