Sun Pad Repair
 

My 32 has the logo hatch and I have three small tears of which are 1" or less in length and they are not completely torn but I don't want them to get any worse. Anyone ever tried to do minor repairs to the sun pad and how did you do it?

Is it torn all the way through? I had some small tears show up last season on my pad too but the webbing on the underside was still in-tacked so I just ran a bead of supper glue along it. So far this season they haven't gotten any larger. Not the best fix but it will do for now and it's not that noticeable.

I had a small split in my logo on the 32'. I pulled the cover and sent it back to Mcleod.

HRT bought McLeod and is trying to reach out to people according to the attached thread. Might want to reach out to them

http://www.offshoreonly.com/forums/f...ml#post4330927

We at HRT can help repair your Sunpad back to OEM quality, different vinyl colors are also available. If you would like a quote just give us a call here at HRT, we are the new Mcleod interior design group.


Project Engineer
Miraj D'Ave
248-284-1170 EXT 113

You can take a piece of dryer sheet and cut it so that it overlaps the cut by about a half inch on each side, stick it underneath the vinyl and then add super glue to the dryer sheet. This will give it more of a bond than just super gluing the tear. Don't go overboard with the superglue as it could melt the vinyl. Works great and should last a few seasons.