Factory Max trim Settings
 

Anyone have the procedure(measurement) for setting the max trim setting on the 32 SS. My old one was set perfect from factory which I liked! You can hold the trim all the way and you are done WFO.

I was just wondering the same thing today. I find myself bumping it a little more to get to the sweet spot.

You must be boating in a lake that is flat all this time. The sweet spot will be as different as the conditions. Seas, wind, fuel, people on board, how much weight in the cabin, etc...

I agree, the sweet spot varies absolutely however I am looking for a measurement from the face of the cylinder to the center of the trim cylinder bolt so I can properly set up my trim. I like everything working perfect.

21 3/4

Boatnt. thanks for the reply. I know trim setting differ in water conditions as mentioned in a prior post. However your measurement is it from the face of the hydraulic cylinder to the center of the bolt? Again its nice to have that setting in place and from there we trim accordingly.

center of bolt to center of bolt

Right on, I'll check mine and adjust accordingly! Thanks again!