2005 32' Stock Bow Locker Anchor
 

Does anyone have a part number for the anchor that is a direct fit into the stock location of the bow locker?

call or email them directly...they'll reply asap !!!! I can measure mine this weekend if you need me to.

I emailed sunsation. they provided a link for the anchor. The anchor is not even close. Contacted them back and was told "Sorry that's all I have" and that was all they had to offer. I thought it was rather odd. this is my second 2005 Dominator, and the anchor in my first one was ultimate and this one is missing. cannot believe its this difficult to come up with the correct anchor for this boat.

If someone sends me measurements with the pics of an anchor possible I can match it up. I do have many anchors as well.

I would think an FX-11 would be the correct anchor. You might have to cut the stock down a bit if it won't fit into the cradle but I've done that on my Fortress and it still performs as designed.


.

I'll get you measurements and pictures off mine this weekend, its an 09 though...guessing its the same??? worst case buy one that 's close then do some cutting to make it fit right.

hey BUP......guess I should've thought of you first. I have the measurements actually based upon the wrong one I have and setting it in place and taking measurements as to how far off it was. I will text those measurements to you. thanks for reply.

Thanks much....

didn't get them sorry...will be back out by the boat this week though.

did you ever get the info ?

Would be great to find out as I bought a 32 that has no anchor also.

SCP 41710 Seachoice Deluxe Fluke Anchors - Anchors
We have been using this anchor since at least 2012. We buy direct from Land N' Sea. 2017 LNS Master Catalog. I'm not sure if they sell to the general public. But many places have this anchor. Check out the dimensions and you can probably find something similar. It is the 8 lb anchor. Fortress makes really nice ones but you'd have to check the measurements to make sure it will fit.

NO
i'll have to dig mine out that is wrong (That I was given specific part number of) and my measurements of what was wrong and go from there. just seems rather ridiculous that the hatch in the boat was designed around a specific anchor that works great, and the information on THAT anchor simply isn't available.

cat800 sent you a pm...check it out and get with me...I'll be down this afternoon and be by the boat again.:party-smiley-004:

Not Sunsation related, but I replaced the stainless (Fountain) anchor in our boat with an aluminum Fortress. The stainless was just too heavy for the wife to handle - so I bought the Fortress, cut it down and shaped it to fit the anchor locker in the Fountain. It holds just as well as the Fourntain anchor, although we really only use for raftups.

https://cimg9.ibsrv.net/gimg/www.off...232a869f33.jpg
anchor is 22" long and 16 1/2" wide...that's the width of the round shaft that fits in the mount in the bow. You'll have to measure your mounting brackets width to make sure you get an anchor that fits between them... I didn't measure mine. I also don't know what the weight of it is but it's not very heavy.

Thanks Riverratt. I did measure min locker. the width is 18 1/2" wide (This could probably be 18"). The round shafts that snap-in need to be 3/4". The end (Rope end) of the anchor to the center of the round shafts is required to be 19 1/2" max (This could probably be 19").

i also suggest going to the hardware and purchasing some neoprene snubbers that can be glued to the ends of the shafts to help out the paint scheme on the hood of the boat.