2008 Sunsation 288 Step Hull
 

Summer is over.........but
I was wondering how much are you trimming the outdrive with 288 step Hull, seems like i do not need as much as a standard v-hull.
I have k-plans and leaving them level with Hull.
Thanks.

Hello,

I have 05 288. There is very little to no difference if I use trim. I have just started playing with my trim tabs level with the hull.

Lou

Seems like you do not need to trim the drive with the step hull.

Part of tne theory behind stepped hulls is that you need little or no trim. All the power is directed at pushing the boat forward rather than upward and forward. Can’t speak for the Sunsation but my old Donzi 27 ZR ran best with just a touch of trim up. Anything more just increased revs and prop slip, but not speed. Same setting for the tabs, except for getting on the plane or to balance the boat in a beam sea.

RR

2008 288 step hull prop
 

Also, what prop is everyone running with the 2008 and up 496 HO step hull??
Heard grinding the diffuser ring off helps.

Running a 26 pitch Bravo 1 and it wants to run fast all the time, tried a 24 Bravo and it does not need to run as fast as the 26 all the time, was better overall.

26 pitch Bravo 1

Don"t you find you have to run the boat fast at all times?? Have you tried a 24 pitch?

Looking at a Bravo 1 24 pitch now.....

WOW.... has anyone noticed the price of props went up. :(

Pretty sure my Donzi ran a 26” Bravo. Boat wouldn’t plane much under 30 mph but I’ve heard the 496ho is comfortable cruising between 3500-4000 rpm’s, which is well above 30 mph. In rough water it was annoying, couldn’t plane at 25 so I was either falling off the plane or running a bit faster, trying to miss tne potholes..🙂

RR