Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Superboat (https://www.offshoreonly.com/forums/superboat-44/)
-   -   Steering Questions (https://www.offshoreonly.com/forums/superboat/117736-steering-questions.html)

RazorsEdge 12-04-2005 04:19 PM

Re: Steering Questions
 
Is there any downside to putting in a tilt helm and all internal hydraulics before putting on a single or dual ram? I would go dual, but because of cost I will probably piece the system together and would like to start with the internals....
Please let me know.

Dave M 12-04-2005 06:41 PM

Re: Steering Questions
 
2 Attachment(s)

Originally Posted by RazorsEdge
Is there any downside to putting in a tilt helm and all internal hydraulics before putting on a single or dual ram? I would go dual, but because of cost I will probably piece the system together and would like to start with the internals....
Please let me know.

Until you install the external stuff, you can't install the internal helm. Well, maybe, the new helm I got to connect to my hydraulic helm wasn't compatible with my stock cable helm. I would just bite the bullet and get a FULL system. The tilt helm units add quite a bit to the price of the system. I don't think they are necessary. On my 24, the wheel is at a good angle.

Dregsz 12-04-2005 08:20 PM

Re: Steering Questions
 
Along the same lines:

Which systems are the easiest to bleed?

I'm going to bleed my Mayfair single ram in a week or so and I've heard they aren't very easy to bleed.

Can I add on to a maiyfair to twin ram?
I'm thinking of swapping in twins?
Thanks
Evan

I didn't think this was pirating the thread since it is somewhat pertinant to the subject.

RazorsEdge 12-04-2005 08:59 PM

Re: Steering Questions
 
I'm just finding it hard to find threads on the info I am looking for. I would like to hear what all of you are running, how you like it, and what you would have done differently.

RazorsEdge 12-04-2005 09:13 PM

Re: Steering Questions
 
I thought the add on systems used the stock pump. Stock pump - to helm - to ram (? or stock unit). Can it be done reconnecting the helm to the stock unit.

If not I will add a single ram setup first.

RazorsEdge 12-04-2005 09:31 PM

Re: Steering Questions
 
Zeiger, IMCO, Mayfair: is one better than the other for our application when it comes to a single ram add on kit?

lightspeed 12-04-2005 09:38 PM

Re: Steering Questions
 
You Use The Stock Pump,,, The power Hydraulic Helm,,, the stock cooler,,, to a filter///// to the back////// if you have a cyl you can get another as long as you have the proper plate on the drive to hook it up///// if not you can buy the right one to hook up two cyls on drive

RazorsEdge 12-04-2005 10:16 PM

Re: Steering Questions
 
Dave M,
In your picture, what is your throttle mounted to? Mine is flat against the helm, I would like to angle them some.

Pat McPherson 12-05-2005 07:10 AM

Re: Steering Questions
 
1 Attachment(s)
Full Hydraulic is of course the best.
If you don't have the $$ to redo from helm back, I would suggest a twin piston "Add On" system. Then add the hydraulic helm down the road.
My boat has Imco...

Dave M 12-05-2005 07:22 AM

Re: Steering Questions
 

Originally Posted by RazorsEdge
Dave M,
In your picture, what is your throttle mounted to? Mine is flat against the helm, I would like to angle them some.

There is a wedge between the contols and the dash. It is made out of starboard. It was like that when I got the boat. I was actually thinking of getting the throttle pod for my controls and then putting a switch panel where the controls are now.


All times are GMT -5. The time now is 03:58 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.