Re: Rob, Huntington Beach !!
 

That motor was on the merc racing line up for a couple of years. 6.2 377 CI 377 HP.

Re: Rob, Huntington Beach !!
 

Gary only 2367 more posts and we have a new winner. double the posts for double the motors

Re: Rob, Huntington Beach !!
 

Rob,
I'm going in to the shop for a little while this morning, I'll get the measurements for ya.

Re: Rob, Huntington Beach !!
 

Thanks Rick, when is the est. date the hull will be ready for rigging?

Re: Rob, Huntington Beach !!
 

One more for ya Rick; has JC looked into the canopy's lately? I saw a company "sheilds" that was stamped into the canopy's ona bunch of the boats at the LA show... They were nice with very little distortion!!! I'm thinking wind might be a bit of a problem @ 100mph+.

I found the link to the company check it out
http://www.racingshields.com/F16.htm

Did I mention I spend way too much time on the internet!!!

Re: Rob, Huntington Beach !!
 

Rob,
Just back from the shop.
Transom width- 71" at top.
Rear bulkhead- 54" from transom
We have been finishing up your deck and all the components of the boat. The cockpit liner was finisher friday, the deck is fully cored along with the windscreen. monday we will do all the grinding on the deck to get it ready for the final glassing. Before I start the hull, I want to get these parts out of the way. Figure 1 more week and the hull will be on it's way, and it will go fast since everything is made already.
Give me a little while to post the pics I took today. I have to make dinner for Kate and the girls. No Wisecracks !!!

Rick

Re: Rob, Huntington Beach !!
 

Were waiting.............. MR. MOM.

Re: Rob, Huntington Beach !!
 

OK Rob,
Pictures are downloades, resized and ready to go.
Here are the pictures of the deck, and cockpit liner.

Rick

Re: Rob, Huntington Beach !!
 

Looking good Rick!!!!

Re: Rob, Huntington Beach !!
 

Gary if you get a chance check with Typhoon and see what they want for those 377's if they still have them... allways need a back up plan!!!