30' Canopy Boat?
 

Rick, What every happen to the rendering of the 30' Canopy boat that used to be on the site, where did it come from. Also it;s time for the old man to start spending some of that money on product deveploment, anything in the works, lastly what do you think of adding straks to the bear section of the hull, a lot of those European boats have straks all the way to the transome, it seem to give more lift, just wondering.

Eddie

Re: 30' Canopy Boat?
 

How about something even simpler. Change the angle of the pad more like the fountain/velocity. Lots of lift on those.

Re: 30' Canopy Boat?
 

I think Rick said that a flatter pad has been tried and the boat leans to one side do to the narrow beam...

Re: 30' Canopy Boat?
 

Ok Then More Straks It Is. Ill Get On A Conference Call With Jc Now For The Changes. Anything Else ?

Re: 30' Canopy Boat?
 

Ask him to build one for me and put it on my tab! :D :drink:

Re: 30' Canopy Boat?
 

Eddie,
If you want real F16 canopies you can have them. They cost a Small fortune though. There are aftermarket ones out there, but from what I've heard, the view is distorted looking through them.

Rick

Re: 30' Canopy Boat?
 

I drove the 1st Y2k that had them, that is not what I'm talking about, There used to be a rendering of a 30' canopy boat that John was looking to build, it used to be on the site, it was a single canopy not twins, for twins Look at the twin canopy Donzi in Super Vee, their site used to have the Step by step progress of how they did it,

Re: 30' Canopy Boat?
 

Eddie,
Was it a rendering from JC ??
All I know is we're soo busy building these things right now, we really don't have time to do the tooling. We need more guys !!! 3 more would be nice.
PS, did you get my PM ??

Re: 30' Canopy Boat?
 

Hey my boat has a pad,it don't lean,or go that fast!!! tripps

Re: 30' Canopy Boat?
 

Rick, no PM send it direct,
[email protected]