Offshoreonly.com - X-dimension on a non-stepped 24

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Superboat (https://www.offshoreonly.com/forums/superboat-44/)

- - X-dimension on a non-stepped 24 (https://www.offshoreonly.com/forums/superboat/183947-x-dimension-non-stepped-24-a.html)

onesickpantera

04-07-2008 12:44 PM

X-dimension on a non-stepped 24

Anyone know what the "standard" X is on a non-stepped 24?

Pat McPherson

04-07-2008 01:06 PM

Approximately 17.5 inches...
The prop shaft on both my 1997 24' Super and my 1989 24' Pantera where about 5" below the V.
This is the perfect spot for a 3 or 4 blade prop and a little low for a 5 blade.

onesickpantera

04-07-2008 01:44 PM

Quote:

Originally Posted by Pat McPherson (Post 2516281)

Thanks Pat, I am at 17" and I think a 1" shortie may work well with that Bravo prop.

JCPERF

04-07-2008 08:13 PM

The 24 we went 102 in had the bullet at about 2 inches below the V

Pat McPherson

04-08-2008 07:21 AM

Quote:

Originally Posted by onesickpantera (Post 2516340)

Thanks Pat, I am at 17" and I think a 1" shortie may work well with that Bravo prop.

Yes, I think a 1" shortie would work with the 4 blade on your boat.
T-Mone has been thinking 1" short on his Pantera too. He runs a 5 blade Hydro P5-X.

Pat McPherson

04-08-2008 07:22 AM

Quote:

Originally Posted by JCPERF (Post 2516875)

The 24 we went 102 in had the bullet at about 2 inches below the V

Hey Jeff,
What kind of prop?
5 or 6 blade H prop?

z.zuperboat

04-08-2008 07:43 PM

I think Jeff had a 6 blade Herring. But I could be mistaken.

All times are GMT -5. The time now is 01:14 AM.