Superboat 30 Y2K! Me three!
The following users liked this post:
Nothing personel 353 (03-19-2021)
#84
VIP Member
VIP Member
Thread Starter
#85
VIP Member
VIP Member
Thread Starter
I’m liking the “aft cabin” or is that the dance floor?
Ballast tank looks awesome.
Jr’s redone dash’s came out nice Rick. His boat is really starting to come together.
Ballast tank looks awesome.
Jr’s redone dash’s came out nice Rick. His boat is really starting to come together.
#86
Registered
#88
VIP Member
VIP Member
Thread Starter
Thank You! I paid Superboat a visit yesterday. A lot of activity centered around John jr’s boat, in an attempt to splash it. As far as mine, I would assume a couple months out, but again motors may not be available till fall so there it will sit. Now that John jR’s boat is out, there is some freed up space. Not much more to do on the hull. Then we can pull the hull and the deck out of the molds and put together. John and I have been discussing how he will be modifying his current mold for the transom piece for under the I/o swim platform and turn it into a one piece outboard bracket which is a great idea and should Look awesome as well as create some ballast for the stearn! Next issue is on chasing the trailer manufacture to get that on premises. He’s been dragging his feet a bit. Already have been in touch with Phil at P&G canvas. He is a master of his trade and he’s done several of my boats before. Discussed my ideas with John on the interior and keeping the interior simple with a black and white motif with some diamond stitching in the seats, nothing extravagant.
__________________
Gary H...
Gary H...
Last edited by SUPERSTITIOUS; 06-08-2019 at 06:36 PM.
#89
Registered