Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Superboat (https://www.offshoreonly.com/forums/superboat-44/)
-   -   Superbabi !! Heres your pics of your Y2K (https://www.offshoreonly.com/forums/superboat/90021-superbabi-heres-your-pics-your-y2k.html)

Pure Energy 07-15-2008 12:39 PM

[QUOTE=Pat McPherson;2623849]

Originally Posted by Pure Energy (Post 2621676)
Nor did I say you did.

So K, are you going to be out east on the 26th?


Hold back, go back....same thing


The 26th, I hope so:ernaehrung004:

Superbabi 07-15-2008 04:38 PM


Originally Posted by Pat McPherson (Post 2623851)
http://www.offshoreonly.com/forums/s...d.php?t=187738

A little late for you G, but interesting...

Pat, thanks I did see that thread, and they sent me a PM, looks like a nice way to bump the 600sci !!!!

FX10 07-15-2008 10:31 PM

Gary,know of any way to kidnap on of those NXT's (did I get it right?) from Merc. ?

Superbabi 07-16-2008 04:50 AM


Originally Posted by FX10 (Post 2624935)
Gary,know of any way to kidnap on of those NXT's (did I get it right?) from Merc. ?

Rick, I'm pretty sure the dealers are going to be breaking up the 700/NXT pkg. soon. So the NXT is perhaps another way to go. I believe merc does rate the drive at 800 hp !!!!

Rik 07-17-2008 12:24 AM


Originally Posted by FX10 (Post 2620409)
Does this mean we're going to start thinking about surface drives again? ;)

If so, I have a new drive I have just completed designed for single engine 30' and less boats. Well, it can be used for more than that but for this situation.

You won't have to worry about it breaking.

Superbabi 07-17-2008 05:00 AM


Originally Posted by Rik (Post 2626223)
If so, I have a new drive I have just completed designed for single engine 30' and less boats. Well, it can be used for more than that but for this situation.

You won't have to worry about it breaking.

Rik, could you go into detail a bit ? ( Photos ), or should I give you a call ??

FX10 07-17-2008 06:55 AM

I'm dying to see a picture of this thing!

Rik 07-17-2008 11:10 AM

They are coming off the horizontal today.

I made a new rudder housing that accepts a "Bravo" style propeller.

This will give anywhere from 10-15 degrees more rake than I could get out of a Speedmaster propeller and we all know the cost obstacle when dealing with the speedmaster propellers.

The Maximus will fit also and this propeller has 30 degrees of rake.

This will allow a smaller boat that does not/can not handle a Cleaver propeller to run an Arneson without being burdened by a cleaver propeller.

The drive will have:

Less Stern Lift
Less Side Loading
Reduced Listing
Lower, FAR lower propeller cost and sourcing
Less "Man Handling" from the propeller

More Bow Lift
Less RPM to get on plane
Wider selection of propellers
Lighter propeller (if that matters)
Improved reversing, as the blade is not so blunt in the rear
Better tracking
More Propeller Rake. 25-30 degrees vs 15 for a Mercury Speedmaster.

For a small, or single engine application, this was an issue to some degree depending upon who's hull was being used. The propeller cost and selection was always an issue. Now with the high rake Maximus, the Bravo and others the advancement of technology has allowed us to take advantage of it.

berns29scarab 07-17-2008 11:35 AM

hey superbabi...i think i saw you around the Seaside Bridge Friday...late afternoon

Superbabi 07-17-2008 03:10 PM


Originally Posted by berns29scarab (Post 2626671)
hey superbabi...i think i saw you around the Seaside Bridge Friday...late afternoon

berns29, yes we were crusing around that time, just picked the boat from typhoon, what boat were you in ???:cool:


All times are GMT -5. The time now is 03:21 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.