Time for Prop info, 30Y2K
 

Ok, so what prop are you Y2K'ers spinning?
Pitch
Blades
Manufacturer
Labbed?
Known Slip?
Best Pricing?

Speed at 3500 rpm
Speed at WOT (what rpm please)? Loaded w/fuel & folks?
Engine, hp

I'll start -
26P
4 blade
Merc Bravo
Not Labbed
Slip???? Haven't done the calculation yet.

@3500, ~49mph on gps
@WOT 5000rpm, ~72.4 mph loaded
Merc 496 mag HO

Thanks - this should get interesting real fast...........

Re: Time for Prop info, 30Y2K
 

BAM's prop slip calc shows 14% slip @ 3500rpm, and 12% @ 5000rpm for your speeds.

http://www.go-fast.com/Prop_Slip_Calculator.htm

When you are ready to test some props, you can try my 27 Hydro. Bill's getting some 26p Hydro P5X's that we can try too.

Re: Time for Prop info, 30Y2K
 

HEY KRAC,
hope all is well, your boat needs bow lift, reg hydros and all cleaver style dont work well, the new 5 blade round ears work the best , great mid and top with a strong hole shot , bravos come in second and alot cheaper, my numbers are,hydro 29p 5 blade round ear 5700 rpm 91 mph on gps, 31p bravo 4 blade 5600rpm 87 mph on gps the handling and turning ability on the 5 blade is much better and I think around 13% slip, my hp is approx 700 I highly recommend Julie and Matt from throttle up props in fla
regards
Jim

Re: Time for Prop info, 30Y2K
 

Hi Krakmeup,
It's great to hear that she is running so strong for you.
Darin at Houston Prop did a great job repairing and labbing two props for me last year.
Like Jcap said, tell him you need lots of bow lift.
I first tried having a prop labbed by local guys here in CT and I lost speed. Probably because the boat lost bow lift. After Houston prop fixed my props I gained 1-2mph and the boat will stand on the prop... :drink:

Re: Time for Prop info, 30Y2K
 

That rules my Hydromotive out, but Bill's are P5X round ear so maybe one of those will work. My Bravo is a 30P, I don't know that you could pull that one.

Re: Time for Prop info, 30Y2K
 

I think that speed is PHENOMENAL for an out of the box boat with stock power! :D

Re: Time for Prop info, 30Y2K
 

Thanks Jim - I agree!

Also thanks for getting the slip info - I need to spend some time with all this.

I'll look to purchase one prop (so I have a spare), so I'll start looking for the ideal prop based on everyone's input, so keep it coming. Thanks jcap and Pat also for the good info - I'll be checking with these folks in the weeks to come.

Since the fuel tank is now near empty, I've gotta go run her empty and unloaded to see what I can squeak out of her now, so maybe a quick run or two this weekend and I can post again.

Re: Time for Prop info, 30Y2K
 

Krak, Jc Says 75mph Wot, You Tell Me. I Guess It Will Be Lite Load. Out To See Jc And Guys Nov. 11. Put More Options On Boat. Deck Sprayed, Rick Not Feeling Well Things Going Slow On My Y2k, Its Nov. Who Cares Lol. Good Luck With Prop Game. Gary

Re: Time for Prop info, 30Y2K
 

I Think Its Time Jc Step Up The R&d On Props.there Are Some Guys On Long Island Running 6 Blades And Going Over 100 With 27 Activators.i Hear Lots Of Lift And The Boats Ride Like Their On Rails.is A Bravo 4 Blade The Best For A Y2k. A 5 Blade Worked For Cappie, How About On A Stock Y2k?

Re: Time for Prop info, 30Y2K
 

Hey ZZ,
How are things? Did you ever find a good prop for your new setup?
Do you think you may have gone a little too high with your prop shaft?