![]() |
installing cleats
So my RR only has 1 cleat on it. on the bow.
I am getting ready to order four 4 1/2" pop up cleats from eddie marine, and am wondering who as installed cleats on their boat, and their regrets in terms of midship cleat placement. (where your midship cleats are, and if you like it) thanks |
Mine has cleats on the top deck of the stern and has eyelets in the back on the transome. I use the eyelets most of the time.
No cleats midship and wouldnt probably want any unless they were pop ups. Even then I dont think Id use them much. |
I installed cleats on all of my Sutphens. That is one negative, not enough cleats. I installed a pop up on the bow and two close to the transom. Then I installed the pop-pin fender tie downs, from Eddie marine, on both sides where I like my fenders to go. Worked great on both of them. It's an easy job but measure 17,345,876 times and cut once.:evilb:
|
Fender pop pins I need to look those up.
Its easy enough to tie them but why not be trick. |
They work great and when they aren't in it just looks like a small through hull fitting.......
http://www.eddiemarine.com/store/car...&p=13744&c=222 |
I've got 5(?) pop up cleats. The only thing I would do differently in the bow would be to put a housing around the back of the cleat with a tube directing any water that gets past them into the bilge so nothing in the forward storage locker gets wet.
|
Eddie marine has a kit that goes under the pop up cleat that leads to the bilge
|
Originally Posted by sixmassive
(Post 3197940)
Eddie marine has a kit that goes under the pop up cleat that leads to the bilge
Do the push pin bumper locks let water in too? Cause I am liking those babies. |
Originally Posted by wstultz
(Post 3197644)
They work great and when they aren't in it just looks like a small through hull fitting.......
http://www.eddiemarine.com/store/car...&p=13744&c=222 |
Originally Posted by 30ctsutphen
(Post 3198083)
screw that, nothing that allows water into my boat is going on my ride. I spend too much time keeping my hull dry to have something like that on her.
Do the push pin bumper locks let water in too? Cause I am liking those babies. |
| All times are GMT -5. The time now is 06:59 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.