Tsunami
07-18-2013 | 07:45 PM
#72
Registered
Joined: Jul 2006
Posts: 408
Likes: 1
From: Wenham, MA
it was a joke. Responding to theTOWING joke.monday we went out ran 36 s boat would not go at all. Went back pulled out put 32 s on .so this is the first time out with boat running properly props pump ect ect. Ran great had a blast still learning as we go did run 96 8 in ocean boat was not done yet.not opened all the way.100 plus will be done once i grow a pair.
Innnnnnteresting..
07-19-2013 | 05:42 PM
#73
Registered
Joined: Feb 2013
Posts: 471
Likes: 0
From: Hingham,Ma
billy to be honest with you we had the boat doing 77 .4 after pulley change .then put imco -2 and went down 72.3 but also had prop repairdsuck job. that screwed every thing .but would still like you to adjust computer.thanks dan .now we also now have 5 blade maximus.
Last edited by pinball; 07-19-2013 at 07:06 PM.
07-19-2013 | 06:01 PM
#74
Registered
Joined: Feb 2013
Posts: 471
Likes: 0
From: Hingham,Ma
07-19-2013 | 06:29 PM
#75
Registered
Joined: Feb 2013
Posts: 471
Likes: 0
From: Hingham,Ma
those engines are gems. thanks
07-25-2013 | 04:03 PM
#78
Registered
Joined: Feb 2013
Posts: 471
Likes: 0
From: Hingham,Ma
04-03-2014 | 07:50 PM
#79
Registered
Joined: Feb 2013
Posts: 471
Likes: 0
From: Hingham,Ma
We never had 28's when we had it. We had a set of worked 30 Bravo's and a set of worked 30 or 32 Hydromotive Quad 4's. I believe we spun them up to 5400-5600 rpm. The Hydromotive props were faster by a few MPH. What direction are you turning the props? It is faster turning them in.
Last edited by pinball; 04-05-2014 at 03:56 PM.
04-07-2014 | 06:54 PM
#80
Registered
Joined: Jul 2005
Posts: 25
Likes: 0
From: Brooklin, Onatrio
We had pick ups in the trim tabs.. We had a 1/4 turn ball valve on the dash in front of the throttle man's seat for filling or stopping the filling process. Drop the tabs an open the valve and the tank would fill in 45-60 seconds. We had two large pumps that could pump out the water in approx. 45 seconds. The outlets were on either side where the race # is. There was a small vent outlet on the top of the tank that blew water out on the ports side above the rub rail that let us know when the tank was full. If I remember correctly the tank is 42 gallons.
