external steering
 

Brand new in box Marine machine add-on steering kit. 2 complete rams (hull mount and clevis to plate), 1-old style (pre-2004) Bravo wing plate and all mounting bolts/studs, 25 ft. of HP hose, all fittings and thru-hulls in packages. Also included is a new Char-Lynn helm. All items are brand new. Package lists for 3k w/o helm. Everything for $2200.

I apologize, I'll get pics soon.

Where are you located?

damn if was for a twin

St. Louis, MO.

if the rams will work inboard of your drives buy another wingplate and a tiebar and you're set

pics
 

can you email pics to [email protected].

thanks

I will try today or tomorrow...camera is fouled up. Will try phone later. If I don't get them up this weekend, I will be able to email by Mon. for sure. Thanks.

:worthless_without_p:violent040::cheer::throw:

Interested.

Again, apologize for no pics. Will have them Monday. If interested, leave email address. Thanks.

very interested.

need to know the mounting distance between center line driveshaft and the ram mounts. or, the distance between the transom assy and the ram mounts

thanks
Ned
206.919.4194
[email protected]

I do not have a template on paper that gives me that number. I'll check the rams to see if 8 or 9 inch rams. I know typically the ram is half way out on each side when drive is straight (center). This probably doesn't help you, but don't have a drive to "mach up" system. Marine Machine will certainly have info...see what I can find. I am guessing you might have an obstruction. For now, I can measure ram end to end (in and out position). This might give you some idea. I'll get back to you this evening on that number. Pics Monday.

Rams...(from end of hull mount to center of hole on clevis)ram in=22.75 inches; ram out=31.75 inches...9 inch rams. Don't have measurement off gimbal for hull mount yet though.

pic.

Offers? Gotta go!

Sold.