SUPER DEAL on #3's !!!
 

Just came in ,,,,,#3's ,GIMBALS complette with Steering .

1:48 ratio gone thru recently and flawless looking paint.

Basicly NEW looking ,not a scratch.:evilb:

$ 14500 !!!!!! or best offer . Shipping is my X-mas present in the US ! :cool-smiley-011:

Bring me OFFERS ,,,

Here is a picture of the drives and so on.

No offers ???????????? TTTT:(:eek:

Let me know what u would pay for them ?!

ill start the bidding at $1!!!!

Daredevil,
I have a couple of rookie qustions for you:
What is the difference between the ssm #2 drive and the #3?
I have a trs drive/merc II trans now (running 625hp thru it). Would the #2 or the #3 be a direct replacement/upgrade for it?
Thanks

The #2 would bolt up to your Gimbal ,,the #3 is much newer and stronger then the #2 but needs diffrent Gimbal,,,also running a MercII with 600+ HP is tuff, but all depends on Boat size and weight .

The #2 is basicly a TRS upper with a speedmaster style lower.

If u whant to bullet proof it i would take the #3 with Gimbal and a BW Tranny.

Changing the Gimbals is not a big deal if u go from TRS to SSM since the SSM Gimbal is a little bigger,,only if u go from TRS to Bravo Transom needs to be filled in.

Doesn't the engine need to be moved forward a few inches to make room for the longer BW trans?

Not shure,,,??? I quess u got a point unless the bellhousing is diffr. ????!!!!

Need to check.:eek:

Thanks for the answer daredevil,
So the #2 would bolt on to my current trs gimbal?
However, for a bw trans I would need to move the engine.
You are asking very fair prices. Do you have any pics of the #2?
I am hoping to make my way down to Florida in Jan.
Thanks,
Tom

No pics,,for now i will try to get one ASAP.

But remember i only have 1 #2 for now !!!!

OK now ,,,the #3 shown in the pic are like new as u guys can see,,,,,so dont try to be girls and make a realistic offer .

They are realy in perfect running condition and look flawless.

:drink:

Girls? :party-smiley-004:

Ok, because santa was nice to me ,,,i will be nice to you,,,,lowerd the price ,,,,

COMPLETTE $ 13800.00 . NOW THATS A STEEL for what you get and i throw the props in for 14 K !!!!!!!!!:eek:


+ they are only freshwater,,,not kidding ya !!!

Is nobody looking for a set of #3's with everything in complette 100 like new shape and only freshwater run ??????:eek:

Help out a poor guy like me and take these of my hands ,PLEASE ! :party-smiley-004:

OK,,,,u whant it that way ,,,$ 12500 !!!!!!!!!!!:eek:

OK ,,,2009 ,i be a better boy.

SO TAKE THIS OFF MY HANDS !!!!!

12K :eek:

Like new !!!! or slitley used !!!! :drink:

Stop pushing me to the 2nd page >>>> LOL:evilb:

OK ,,,,,bring some sirius offers please,need to move these.

Still not sold,,,,,wtf.

Come on guys,,,make me an offer,,these are in perfect condition.
only reason for sale is upgrading to #6 .
MORE POWER.

whats the dimension of propshaft to input shaft compared to to a standard Bravo setup?

I would say about 3-4 inches longer.

Need to mess. a bravo first,dont have one .But i can mess a #3 and let u know.

Ok,,,X-DIM. = 24 & 9/32 between center of yoke and center of propshaft.

Hope this helps u.

Do they come with the Transom Asemblies ( Inner and Outer )

YES THEY DO.

TSP, I have a pair of #2's, fresh, 0 hours. Let me know if you're interested. You can email me at [email protected]. I also have two pairs of BW 72C's, a Merctrans, a couple of TRS gimbals with rams and a fresh pair of 0 hour 496 Mk. IV long block stroker motors as well. Looking to sell it all.

Thanks,

Harry

Harry....Keep the change.

http://www.offshoreonly.com/forums/w...sm-drives.html

Thanks! I had seen that earlier and emailed him, just waiting on a response.