All Still Available
 

M-1 Procharger for 502 or 454 Mag EFI

All thats required to complete this set up is a good Aeromotive pump and regulator. All parts are here - Blower, Intercooler, Spacers, (2) Belts, Pulley, (2) Air Cleaners, SS 180 Elbow and original 180 elbow, and intake adapter (not shown)

Fresh water only. 100 hours since new bearings by Procharger. Intercooler only has two seasons of fresh water use only since new.

First $ 2,500.00 plus shipping takes it!!! SOLD!!!!!!!!!!!!!!
Attached Thumbnails

Konrad Ace package with updated gear sets installed by Konrad. Used one season and then inspected and overhauled by Konrad factory. Fresh water use only. Complete with extension box, steering rams, transom asssembly, BAM 1350 transmission and HP Drive. List is $ 28,000.00

ONLY>>>>>>>>>>$ 15,500.00

PROPS

23P Mirage Plus, RH, solid hub Std Bravo shaft - $ 250.00

29P Mirage, RH, solid hub Std shaft, very good- $ 300.00

28P Bravo 1, RH, for hub insert, good cond., - $ 300.00

30P Bravo 1, RH, for hub insert, good cond., - $ 350.00

32P Bravo 1, RH, for hub insert, good cond., - $ 350.00

Plus this Purple Steering Wheel - Momo Spargi List $ 197.00 has tiny chip in it (you can see it in pic) - $ 98.00

And have (5) 3" Purple Cup Holders - $ 8.50 each

Kirk, Thanks again for the prop let me know the shipping cost and I will get you a check out ASAP.

I may be interested in the 23 mirage plus, but gotta try the 21 I just got first. I have 3 more of those purple cup holders if ya need any more to make the sale.

Let me know on the 23P. John 28 is yours.

These work great for a burbon dispencers too.

Was there another use?:eek:

procharger
 

Is the procharger still availiable? And if so whats the difference in the m1 and the m3 procharger?

Is the Konrad drive still available?

I'm interested in the drive lube resevoir. What about the sensor for drive fluid level?

Konrad is still available.

Unfortunately reservoirs sold. Can get new though.

[email protected]

Kirk

for you guys with a single bravo and big hp this set up bolts right in you DO NOT HAVE TO MOVE YOUR MOTOR, its rated for 800hp, but know of a few with more and did wholed up well. I am installing one in my boat which will have about a 1000hp give or take a hundred:party-smiley-004:. don't for get you get steering and a box theres over 6000 right there.

Artie,,,u mean single TRS !!!!!!

Kirk any sea strainers post pics of cup holders id like them. Also need bravo shift cabled

ha,pm me if the steering wheel is still avalible

procharger
 

Just asking if any of you have a used or know of anyone that has a used procharger setup for a 502mpi im very interested in purchasing one?

talk to OCDactive.....

Procharger is still available and ready to go.

Cup holders, strainer and steering wheel are spoken for. No money yet though.

Let me know abot Holders if not