Looking for 4" exhaust lengths
 

I'm looking for 4" stainless exhaust roughly 24" to 32" lengths (need #4 total). Just straight lengths for a new out the transome install.

Thanks for your help in advance,
John

if you just need 4" stainless tube, iv got plenty. Its 304 .06 wall. Do you need it polished and what exact length do you need. I have drop i can make you a killer deal on

I will measure it tomorrow. I have gils with the high elbow riser and I need to get from that point where the riser ends - through the trans. and out the back of the boat. I would like to be about 8" to 10" min. out the back of the boat. Twin application with trs drives. So basically I need 4 pieces of 4" stainless polished about 28" long. I will double check however can you shoot me a price based on what I have here.
Thanks,
John

Do you have any 3.5" for the inner pipe to make dry pipes?

You would be looking at $40 for each piece. THat would be polished, of course, and ready to ship.

We do not have any 3.5" in house. Depending on how many you were interested in, i could check with our supplier. We have 1", 1.5", 2", 3" and 4" s/s tubing. We also have most of these dimensions in carbon tube as well.

Do you do any custom tips? I need 4 each 4" X 12" with a 45 angle on the last 2".

How about 4 1/2 ID looking to modify some mufflers.