steering parts/ headers/drives
 

2 steering sets one new 1300 single ram , one used 1500 twin ram will work for twin drive or single, bravo or trs , stainless marine headers 4'' long thu hull 1200, bravo transom set up with rebuilt rams 1500, new bravo x drive 3800/ bravo 1 drive used with nose cone 1500. turbo 24 3 blade prop.

can you send pics of the rams to [email protected]

can u send pics [email protected]

I HOPE to have some over the weekend, my batt die on the camera and I need to find the charger and then will be getting a lesson on how to post and email pics and if that don't work I will mail out on monday pics to 6 persons so far, sorry:lolhit:

Get with the program Artie chop chop !!!!!!!!!!!!:lolhit::coolcowboy::drink:

can you please send pics of the steering for twin bravo setup...
[email protected]

hows the boat running, mine should be in the water by july, and then find a new hull this fall to rip all the new stuff out:eek:, and it looks like monday I will be getting my lesson on posting or email pics:grinser010:. your boat came out hot like the girls:coolcowboy:

yes to you and all the pms monday:coolcowboy:, if not I am going to hang myself, then there will be two motors for sale and a whole lot of chit:eek:

pics of SM dry set up, this is a gen 2 one set 1200.00, other pics coming of steering/ transom set up is still on boat but will take a pic too. these come with transom rings too and work great with big cams or most blowers under 1071.

the bravo x drive is still in the box from merc:coolcowboy:

Hey Artie, now that you have the camera figured out. How about some pics of the steering setups.

just saw the post, I will tonight got to run, and I sent some to guys that pmed me 1st but will put it up today:drink:

send pics to me as well please

pics I hope, yep this is the single brand new, it has all parts for out side, you would need 2 hoses and brazil manifold, none of the kits I bought came with that it was extra manifold is 80 bucks at any of the stores .

How much for the twin steering setup?

the others sent me a email maybe that can't see pics here.

I'll take the single setup.
Email sent.

I will look for it. and if you didn't leave a phone # do.

573-474-8500 or 636-627-9425

Thanks,
Derek

great talking to you good luck with the spyder.

did you get my pm??

No box was full please resend - I have TRS - looking for Steering parts still - oneserv @ Hotmail is better

I can get trs drive brackets. box is not full now

oh yours was full?

the guy who has the trs brackets wants the twin for his new boat, so single is left, smheaders/ new bravo x drive, used bravo drive, hd transom, 24'' 3 blade prop, or sell the used drive, transom hd, steering for 3400 plus shipping saving 800. or new drive x, steering and transom for 5200 plus shipping.saving 900.

Arti as long as they fit we should be able to put together a deal. You may have some parts left from that to sell. I think I only will need the rams and transome hardware? So if anyone needs to put together a system and needs the drive addaptors then those should still be available. We need to make sure that the pistons will work with my Marine Machine steering plates. I am assuming they will but you never know.

true the mm ram I bought here to match the one I had but the guy lied its shorter than a stock bravo ram, that can be used for a twin or single just need the ends andI have one plate, it would be about a 1000.00 to finish the mm for a single, I paid new 1800 back in 01, I am sure he gets over 2 grand for single. so for the m&m ram only 500.00 to anyone thats what I paid back in 04. so it comes with the transom bracket you need lines, drive bracket for outside.

Is the Bravo X drive still available?, what would be involved in swapping my existing Bravo 1 drive?, let me know, Thanks!

Michael

A ratchet, six nuts, a trim ram pin, and a little tug!

You're welcome! :drink:

haaah yes thats true, theres two guys looking at shipping to cal, mid west, the drive is still in the box in my house guarded by my labs, so its brand new local guy sells them for 5grand plus. so its a good deal and in a next week, I might buy another hull so if that happens and I still have the drives one will be going on the baja so I CAN SELL IT COMPLETE. NOWS THE TIME TO GRAB ONE OF THEM BX OR B1 which is used.

yes but who knows by next week its a deal.

looks like the drive will be sold this week so how ever calls me back gets it, and the used one is still around thanks

DRIVE IS SOLD THANKS PAT:coolcowboy:, I have a bravo 1 with a nose cone 1500 or bo, steering single add on 1100.00, gen 2 stainless marine dry pipes 1200.00 bo, gimbal transom set up inner outer with rams, 1200, low hour merc 509 650hp 10,000.

pm me your number i might take the steering and the exhaust if the price is right

I already lowered the price 200 on the steering, it cost 1700 new which it is never used. with the new drive gone my new one is paid off this week. so sorry thats about it. anyway if someone wants the stuff 617 833 3327 thats my cell. art

GETTING NEAR XMASS haaha still have both steering and exhaust, I bought new ones, all so the boat is for sale bought a new one, 88 ol baja needs glass work will sell 6,000 with 90 trailer comes with old cockpit, racing hatch with scoop, bravo 1 drive hd gimbal, part hyd steering, some new gauges, k planes 280s, will do the glass work for more money and have custom rap round bosters there 2500 extra, full hyd steering inside kit 1300, 650hp 509 12,000 extra

air time send me some pics of the the external steering you have for a bravo setup and list the prices please. I am very interested. thanks [email protected]

prices are listed theres a pic on post 14# of the single steering its 1100 single add on

boat and trailer stripped 3500, or with gimbal, drive ,steering new bolsters, motor ss exhaust for more money. will sell all or stripped for OBs parting out boat. post 13 on page two shows new steering.