looking for 4.500 pistons
 

Hello everybody, I am looking for 2 sets of 4.500 JE or SRP flat tops,around 9:1. Let me know what you have.
Thanks Wes

Are you willing to go new? I can grab ya price if you are.

I think they are only like 600+- a set brand new aren't they??

mrfixxall
 

cmc motorsports srp 598.00 with plasma moly rings

$598.00 w/rings is the best price I've seen so far and I may go that route .I am in no huge hurry ,but i will need them.The budget is getting tight so I have no problem with used as long as the seller is honest and they are a good forged piston like SRP or JE.

SRP pistons
 

I have a set of 4.500 pistons. they are for a 4.250 stroke with a 6.385 rod length. call me if interested. 914-262-1898

I have a nice used set

You have a nice avatar also/ :coolcowboy:

PM sent

I have 2 sets of Ross flat tops that are 4.500. I used them in a 557 with a 4.375 crank and a .400 long rod, they have about 30 hours on em. They are the top line blower pistons with the thicker tops.

Wes i have 2 sets of J & E give me a shout and get them out of here :drink:

Any of these pistons still available?
...JC, 10x, Run, btr?

I have a set of 4.53 srp flat tops with 10 hours on them. They have very nice rings with them. I will make yopu a good deal. They are at the machine shop untill next week, then I can get you the part number. They are 4.5 .30 over for 6.135 rod length. forged pistons with less then 10 hours.

Thanks for your response but I went ahead and bought 2 new sets of SRP's,the machine shop was waiting on me to finish my blocks so time became a factor.Thanks,Wes

Rizzo


2-sets J & E Pistons custom

--------------------------------------------------------------------------------

2 - sets J & E Pistons custom reverse dome Blower/Turbo/Nitrous
bore 4.500 ,stroke 4.500, with 6.535 lenght rod is 7.5-1 compression with BIG Chief heads
250.00 a set OBO + shipping

Bob

Thanks Run, I needed 4.25 stroke & 6.385 rod. Found 'em :drink: thanks to OSO!

hey TX911 pistons still available..your PM box is full Rob [email protected]

I endend up with an extra set of flat tops 4.500 bore 4.25 stroke 6.385 rod SRP 75F make me an offer I can't refuse:drink: