632 CI Merlin BBC - 900 HP Pump Gas
 

Listed this before with no takers at $10,500.

I'm not going to use it: $8,500.00 OBO

Pic:
http://www.247liquidators.com/boat/engine.html

632" Merlin II Block
4340 Callies 4.75" stroker
6.70" Oliver Rods
4.60" JE flat top pistons
10qt Dooley pan
Dart 360 heads fully ported and polished
flow 308 exhaust and 422 intake @.700 lift. 2.30" intake valves 1.88 Inconel exhaust valves
Jesel Shaft rockers 1.7
Schubeck "radius" lifters 276/[email protected] .730"lift 115 CL 1" radius cam
Dart Tunnel Ram
2X775 RS Race Demon TR carbs (flow 980)
10.5:1 CR
93 Octane motor with never a sign of detonation
Motor idles @850rpm and dyno's 900HP @6500
820ft/# @5100
Broad flat curve's. Bottom end good for 8200 rpm
Aluminum Flywheel
CSI starter
system1 oil filter
Keith Eickert 2 piece valve covers

Engine is on a stand ready to ship/pickup.

Thanks,

[email protected] (469) 671-6199 cell - anytime.

Where are you located at?

I'm in Dallas, TX

IF!! you dont have any luck here, consider posting the motor on some "car" sites, I come from a street car/drag racing background and that Motor has some pretty stout pieces in it!!, shouldn't have a problem selling it.

Anyone reading this with a nice 1st gen Camaro or Chevelle, this would be REAL nice piece to have between the frame rails. Pump gas too!!!

Good Luck!
Michael

Yeah I think I'm gonna put it on racingjunk.com too. I had a guy locally who wanted to put it in a truck but that deal fell through.

I've gotten a little interest already. Somebody out there needs this motor...

Thanks.

Do you know the history of the engine ? Such as Hours, Builder, new parts when built, dyno sheets.....You mention there is no sign of detonation....Have you had the heads off ?

More pics coming tomorrow.

More pics added this morning.

http://www.247liquidators.com/boat/engine.html

Bob, you would not have any intrest in swapping for a new 489 blower motor ? new never started, w/177 weaind, pics specs available if interested...thanks Rob

ezstiper - I'm boatless right now which is why I'm unloading the motor. If I had a boat - this would be in it.

--- Bob