wanted stainless marine risers
 

looking for a set to cut up to use on a dyno.

doesn't anybody have used stainless marine risers for sale?

1200.00 comes with manifolds there dry !!!

i have a set of risers if your still interested let me know

risers
 

are they the 4.5 or 4 ? how much?

risers
 

im pretty sure they are 4inch, but i will double check for you. make me an offer and lets go from there. pm me and btw, thay are 4 inch

Pipes
 

Bernie - I tried to PM you, your mailbox is full. As you know a big block chevy has the heads offset by 3" so one is 27" and the other is 24". The tip OD is 4-1/2" the flange diameter is 5-1/2".

I have a set for the standard dominator manifolds. 4" and the long wet ones. make me and offer. call me at 912-313-8686, Russ

$
 

$300 for the pair.

do you have picture of them? are they straight?

I need the genII.I think they are the ones with the 90 or 120 degree bend . Don't have to be in good shape im using for dyno work.

ttt

i still have my set, $300 for the set, they are about 2 ft in length. they come off the manifold and go straight though the transom. they come off the manifold and make a 120 degree PM me if you want them and il get you a pic, im just not familiar with pics on here, its easier to email them directly to your email.

stainlessmarine risers
 

Yes i would like pic. my e-mail is [email protected] . What the od of the outside tube?