Bennett Trim tabs
 

Complete Bennett trim tabs set up with switches, and brand new pump. Have almost enough parts for two complete sets. (not all pictured) Will sell everything for 350.00

make an offer

please send pics of all to [email protected]

What size are the tabs? Come with hoses and hardware too?

They are the dual ram set ups from bennett. I pulled two sets off of my boats, as I went with K planes. Most of the pieces are there from both sets. I will try to get a list of everything I have.

i really just need a pump and switch..so if outlawman needs them. i can always go to ebay

What is the measurement of the actual tab? thanks.

the pic looks like the 12+16 plate. 12+12 would be more square. i think they only make the two in the double ram set up.sport version

ttt

Did you ever run this setup on a boat? I didn't know if the insta-trim pump worked with the Bennett tabs.

Yes, they will work.

can you pm me on what parts you do have. Thanks, Rob

I wouldnt mind having the plates, if someone else just needs the pump, or rams. I have the square ones now, but would like longer plates.

Will sell a set of plates for 100.00.

I have the single ram system on my boat, if I use these plates would my old pumps be sufficient if I use a Y fitting to feed the rams?

To me it seems like it should be... Boat still weighs the same regardless...

Where are you located Lifesaboat?

It should work. LA

I run twin ram tabs, and only have a single pump. My pump is different than the one pictured, not sure how that one works, but the standard bennett pump uses solenoids to send fluid to whichever corresponding tab you press the button for. One thing that I was told by Bennett directly though, is that a twin ram setup with a single pump will be twice as slow as a single ram setup. This is due to their pump being only ably to move so much fluid, if you tee it, you have to move twice as much to move 2 rams, therefore the rams move 1/2 the speed/ The way around this is to run dual pumps, but not really necessary.

Thanks for the info rchevelle! I'd probably have to change my pump as well as the tabs then... The damn pump already moves slow as hell...

How much for complete setup without the extra parts?

NO,

you will need 2 pumps, one for each side, and it will move the same speed it does now. If you were to stck with a single pump for dual rams it would move 1/2 as fast as it does now. I kinda like it sometimes K-Planes can be touchy.

350 and I'll give you everything. I'll cover shipping also.

Ttt

pm box is full...

did you ever get a full list of the parts included with the bennett tabs? It would be helpful and i might be interested... Thanks! Tim

tabs
 

There are two sets of tabs. 8 rams. 4 are longer than the others. 1 new pump, installed and used once. 1 indicator, miscellaneous lines and fittings. Here are some more pics. Will sell one set of plates for 100.00 or everything for 350.00 shipped.

Pics

Still intersted in a set of plates, but got some other things prying my wallett open right now(taxes). Keep in mind that that indicator will require the rams with the transducers in them, there should be one with a red wire, and one with a green coming out of the ram.

If someone else will do a set of plates for say 75, I'll do the rest...

Sold