|
M2 Racing CNC Brodix BB2xtra
One pair of used Brodix CNC heads, Crower 68806 solid roller springs, Crower titanium retainers, these heads have receiver grooves to run the FelPro 1012 gaskets. The grooves are .012 deep and can be machined out. The bolt holes on one end of each head have been enlarged to 7/16 for mounting a Procharger. They have stainless intake and inconel exhaust valves. These heads made 1372 hp @ 6200 and 1200 lb torque on my Procharged 598.
|
do u have a pic,were r u located thanks
|
I also have a set of Jesel rockers fo these heads.
|
3 Attachment(s)
Figured it out.
|
How much did they cost new ?
|
I think they were $3600 with the valve upgrade.
|
heads
how much ??
|
heads
standard or tall deck
|
Originally Posted by jacttm
(Post 3007702)
how much ??
|
Originally Posted by jacttm
(Post 3007704)
standard or tall deck
|
what is the cc chamber
|
Originally Posted by kidapache
(Post 3007729)
what is the cc chamber
|
...
|
would the heads need to be freshened up as far as valves and springs
|
I took them off a running engine, they've been sitting on a shelf ever since. I can have the machine shop check them out.
|
souns good let me know thanks
|
Dropped the heads off at the machine shop today, having them check, valves, seats, guides, springs and CC . I'll post results ASAP.
|
| All times are GMT -5. The time now is 10:50 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.