Bravo 1 drives and gimbals, used
 

I have:

2) Bravo 1 complete used drives with 250 hours on them, all freshwater use. Cases in good condition, new U-joints on them. Paint good.

2) Bravo gimbal assemblies complete, used minus the inner transom mounting plate/rear engine mount. Again, all freshwater and no slop in the steering pins. Paint good.

2) Mirage Plus 3 blade stainless in good condition, but will need hub kits. 23 pitch (I think).

2) 496 GM rebuildable cores. These are basically long blocks with oil pan and timing covers only and were originally carbed. No brackets or accessories. Engines have been rotated, oiled and somewhat preserved.

All parts came from a salvaged 1999 Powerquest 29 footer that burned and sank. All parts already removed from hull. Can be palletized and shipped via truck freight through YOUR carrier.

Questions? Call Don at 877-662-2555 toll free cell phone.

I guess I am stupid. I don't see where to upload a pic of the drives here. I took a few today. If anyone else is interested, call me and I will email the pics to you.

Don
877-662-2555 toll free cell phone

drive and gimbal price on the pair? Where are you at?

These are the pics of the drive and transom assemblies I received from Don.

drives
 

Where are you located.I'm in maryland,what's your zip. JOHN

I am located in southern KY on Lake Cumberland. The Zip I would ship from is 42642 Russell Springs, KY.

I can set these up on a single pallet and wrap them for truck freight and they can go from a marine dealer that has a loading dock and forklift. The last few truck freight item I have sent I have done well with R&L Carriers.

The shift cables are junk and the hydraulic lines inside the gimbals are bad, but all else is good. The bellows and U-joints appear to be new this past season. I have not cleaned these up at all, as you can tell. There is some mud and a waterline on them, but all will clean off if the temp ever gets above 20 friggin degrees again!

Next stop is Ebay.

I figure they are worth $4k

There is no corrosion on these parts and the boat they came off of was trailered, not kept in the water. They were always used here on Lake Cumberland, no salt.

For those that have asked...

I am located in Jamestown, KY. 42629. Right on Lake Cumberland.

I will ship from Russell Springs, KY 42642 from a commercial loading dock, for those looking to get shipping quotes.

Don

I sent you a PM on the gimbals

These are going on Ebay on Wednesday.