|
Stern jacks, props, exhaust tips...
Yet another "garage sale". I have the items below to sell. PM here or [email protected] for pictures or additional information. Offers considered.
land and sea sternjack for bravo drive; excellent condition including all bearings, rams, ujoints, splines, shift cable, etc... $1000 Spinelli 14.5 x 28" 4 bladed prop originally set up for checkmate convincor, excellent condition, no nicks or scratches. $275 27 x 14.5 Mach 4 strerndriver prop; $200 28 x 14.5 Mach 4 strerndriver prop; $200 SOLD Hydromotive Quad iv intimidator 24 x 15.5; $225 Turbo, smaller diamete 26" x ca.13 1/2 vented 3 blade prop, worked well on small alpha drive boat $100 Stainless marine exhaust tips, 2, short, angle flange straight tips, never installed, $100 Corsa quick and quiet 2 complete with splitter tubes, tunable transom mounted muffler / tips, soft hose and clamps. used, good condition, mufflers recenty buffed out $275 SOLD Land and Sea Sternjack for Alpha gen 2 (rams would need to be modified to use on gen 1), complete with rams, excellent working order, bearings, ujoints in great shape, only outside anodize was worn, outside shot in etching primer and could be done in black single stage urethane. $700 SOLD |
Good list, i will take the spinlle blade, is it set up for a bravo 1, or the 27 mach if that is a bravo set up . email me at [email protected] thanks i need a round ear prop
|
How many tips do you have, 2 or 4?
|
Originally Posted by neva satisfied
(Post 3013894)
How many tips do you have, 2 or 4?
|
Originally Posted by fastscarab22
(Post 3013887)
Good list, i will take the spinlle blade, is it set up for a bravo 1, or the 27 mach if that is a bravo set up . email me at [email protected] thanks i need a round ear prop
|
Originally Posted by wtfo
(Post 3013682)
Cleaning out the garage / shop to make room for more toys (or just so I can walk through!)...
I'm not in a huge hurry to get rid of anything, but reasonable offers will be considered. Prices assume you pay freight. PM here or [email protected] for pictures or additional information. land and sea sternjack for bravo drive; excellent condition including all bearings, rams, ujoints, splines, shift cable, etc... $1100 Land and Sea Sternjack for Alpha gen 2 (rams would need to be modified to use on gen 1), complete with rams, excellent working order, bearings, ujoints in great shape, only outside anodize was worn, outside shot in etching primer and could be done in black single stage urethane. $700 Spinelli 14.5 x 28" 4 bladed prop originally set up for checkmate convincor, excellent condition, no nicks or scratches. $250 Turbo, smaller diameter (13 1/2 ?) 26" vented 3 blade prop, worked well on small alpha drive boat $125 2 mach 4 strerndriver props, 4 blade in excellent condition 14 / 14.5 x 27 28. barely used, have been sitting on a shelf. $225 each, fairly thin blades and suprisingly fast based on what some people say about them. I'm keeping a labbed 28... Stainless marine exhaust tips, 2, short, angle flange straight tips, never installed, $100 Corsa quick and quiet 2 complete with splitter tubes, original transom mounted mufflers, soft hose and clamps. used, good condition, mufflers recent;y buffed out $325 that's it for now... maybe more to come once I get into the shop upstairs... Thanks for looking. |
John, Tried to reply to your pm regarding the sternjack but your box is full. Will try again in a while.
|
OK, here it is... please also add another prop I don't need to the list:
Hydromotive Quad iv intimidator 15 1/2 x 24, very good condition - has had some light wear and been cleaned up. runs true and overall is a very nice prop. $275 + shipping |
tim, could you send me your adress for i can send out the check, I dont want to loose the blade scott
|
Originally Posted by fastscarab22
(Post 3015231)
tim, could you send me your adress for i can send out the check, I dont want to loose the blade scott
|
If you see something you want, make me an offer, especially on a couple of the props and the exhaust stuff. Never know, I may take it...
|
ttt Updated, added a prop, changed some prices. Thanks for looking
|
ttt... picking up a new toy tomrrow and need the space in the garage. :-)
|
stern jack
Originally Posted by wtfo
(Post 3013682)
Yet another "garage sale". I have the items below to sell. PM here or [email protected] for pictures or additional information. Offers considered.
land and sea sternjack for bravo drive; excellent condition including all bearings, rams, ujoints, splines, shift cable, etc... $1000 Spinelli 14.5 x 28" 4 bladed prop originally set up for checkmate convincor, excellent condition, no nicks or scratches. $275 27 x 14.5 Mach 4 strerndriver prop; $200 28 x 14.5 Mach 4 strerndriver prop; $200 SOLD Hydromotive Quad iv intimidator 24 x 15.5; $225 Turbo, smaller diamete 26" x ca.13 1/2 vented 3 blade prop, worked well on small alpha drive boat $100 Stainless marine exhaust tips, 2, short, angle flange straight tips, never installed, $100 Corsa quick and quiet 2 complete with splitter tubes, tunable transom mounted muffler / tips, soft hose and clamps. used, good condition, mufflers recenty buffed out $275 SOLD Land and Sea Sternjack for Alpha gen 2 (rams would need to be modified to use on gen 1), complete with rams, excellent working order, bearings, ujoints in great shape, only outside anodize was worn, outside shot in etching primer and could be done in black single stage urethane. $700 SOLD |
Originally Posted by bsc
(Post 3059089)
Do you still have the l&s bravo sternjack, What steering did you use?
Thanks! [email protected] |
| All times are GMT -5. The time now is 01:14 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.