$hredder

For sale. Two complete induction setups. Whipple intake coolers, 250 B&M blowers 30 hrs on Blower shop complete rebuilds, Nickerson 1050 dominators, breathers, crossovers, tensioner, belts & pullies. Everything from the block up less ignition. I will separate sets but will not part out setups. These made over 700hp on HP500's 7#boost. $5000/ setup + shipping. Paul 402-981-8402

Price reduced $4500 plus shipping!! One SOLD

$hredder

The Whipple intakes are 3" shorter than other coolers, I ran these in a 32 outlaw. Blocked up the engine hatch 2". Boat ran a best speed of 92mph.

[email protected]

That's a Nice Setup. Looking to go a different route?

$hredder

Took the blowers off in preparation to sell the boat, found some 500efi kits & put those on. I really miss the power, the midrange pull is something else.

[email protected]

Dean built my Dom. I run a similar setup but no inter cooler I have had some trouble getting the carb leaned out when I got it and Finally pulled the powervalves out. Are you still running the powervalves?

$hredder

Yes

baja_brian

What exactly do you mean "blocked up the engine hatch"?

$hredder

2" blocks at the hinges, dropped the upper part of the back seat on the hatch. Breather bolts touched the hatch. I don't think even another 32 outlaw owner would notice the difference.

Griff

Thats a very good price for some nice complete set ups. Those Whipple intake/chillers are over 3k each.
I'll throw in for Shredder that these were fresh water used at LOTO.
Heck Paul, I think they would be great on your 382

Velocity Vector

iTrader: (4)

Is that a MOAC? and is it standard deck height intake?