photos and such:

http://www.offshoreonly.com/forums/s...i-12000-a.html

call me 717-991-7810 for a better price.

Way out of my league but thanks for the offer.

I have an all new 572 long block minus the cam I'd let go for 5K I have about 6.5 into it.

Why no cam?

I have a 509 complete pan to intake I can part with. Merlin block, heads, and marine intake, eagle crank, manly rods, etc. 15 hours on rebuild with new bearings, rings, 3-angle valve, etc. (have receipts). Let me know if you are intersted and we can talk turkey. My cell is 216.973.6570.

In case you your still looking for options just know I have a fresh 454 short block and either peanut port heads or the oval port 049 heads. Performer int., brand new pistons, rings, bearings, timing chain and gears, etc. I planned on using these engines on my project and went another route. Everything is fresh with 0 hours. I have just waited to assm. the top end so I could taylor someones needs. 9.5 to comp. I have two however would sell one. One is .040 over and the other is .060. They are two bolt mains with the 3/8 rods. I would make you a good deal on one and live just north of Manistee.

I think I found what I need but keep em coming!