Aluminum trailer bunk pieces
 

Left over bunk pieces when I re-did my Myco, there's 15 assorted lengths that we cut off to put new bunks on.
http://i265.photobucket.com/albums/i...s/DSC_0043.jpg
http://i265.photobucket.com/albums/i...s/DSC_0044.jpg
http://i265.photobucket.com/albums/i...s/DSC_0045.jpg
http://i265.photobucket.com/albums/i...s/DSC_0046.jpg

$25.00 plus the ride.

How much for the ride to 28031

If not there than how much to 48433.....I'll take if zfirst deal falls through.

19.00 for the ride

All yours I dont think they will work for what i want, Thanks

Best offer on these or I'll take'em to the scrap yard.

35.00 shipped

More stuff


http://www.offshoreonly.com/forums/s...te-valves.html

http://www.offshoreonly.com/forums/s...-u-joints.html

bump

How are those attached to the trailer...weld , clamp?
thanks

They were welded on my myco but we had to cut them off to re-position the bunks for another boat with longer channels. The flat part was where the bunks bolted.

how long are they I will check the trailer on the 20 tonight to see if they work if so I will take them will let you know in the morning when you give me the lengths

There are 15 pieces,
From the underside of the aluminum where the bunk rest to the shortest point of the angle cut.

One >> 1/2"
One >> 1"
Three >> 1 1/2"
One >> 4 1/2"
One>> 5"
one >> 5 1/2"
Four >> 6"
Two >> 6 1/2"
One >> 6 3/4"