Mercruiser/ Gil Manifolds
 

From Hp500 Fresh Water Only Like New Condition $650

Are these manifolds only? If so, does anyone have a set of full dry tails available?

Harry i know of a set of full dry tails here in mass TRS pipes
-Mike

Mike, I'd be interested. Considering changing out the SM "mostly" dry exhaust on my Corsa. Right now I mix at the tailpipe, I'd like to have separate water dumps and a true full dry pipe.

Harry

Its manifolds and risers... any questions call me at 765-210-1124

Sent you PM,thanks.
Bjorn.

Ryan,

Can you email me some pics of the setup?

Harry
[email protected]

sorry I got to looking at the risers and the are one piece out the end of the boat so I can only sell the Manifolds

Ryan, isn't that counter productive? Why are you selling the manifolds, but keeping the same risers - wouldn't you just have to replace them with another set of GIL manifolds?? You could always sell the risers as well, and put standard exhaust tips on the boat. Let me know, I'm very interested to see photos and make a deal. Are the risers fully dry with separate water dumps at the transom as well?

no they have water jackets in them and I guess I'm am cunfused on what I need... I want to buy a set of different manifolds or headers but dont want to have to have a custome pipe bent for my boat

Drill new holes???

:coolcowboy:

Like I said, counter productive . . . if you're going to retain the risers, then you may as well retain the manifolds as well, as the GIL risers will only work with the GIL manifolds. Are they jacketed and mix at the tips, or do they have a bung with a hose leading to a separate water dump at the transom as well?

nope just on the riser... I was looking at the revolution marine manifolds?? good? bad?

Why would you switch from GIL to Revolution? Revolution is a terrific product, don't get me wrong - but it was manufactured to be an inexpensive GIL replacement if memory serves me. I don't believe there is a performance gain to be had, and I also believe their flange where the riser meets the manifold is different, so your tails wouldn't work with their manifolds. The owner of the company is a member here - I don't remember his screen name off the top of my head, just do a search.