Spring Cleaning at Precision Power Offshore
 

Many used, takeoff, and some new parts. Crash boxes, transmissions, merlin cylinder heads, big chief cylinder heads, lots of misc. Lots of miscellaneous Bravo parts (no gears), used 454/502/575 SCi Pistons/rods, rocker arms, mechanical roller lifters (std. and .903 diameter), lots of others.

Phone (616) 844-1000 ask for Ben.

Got any square (new style) drive fluid resevoir brackets?

What size over (bore size)are your 575 pistons?

Got any Stainless Marine Exhaust Manifolds?

any exhaust

Resevoir Brackets
 

Yes, how many do you want? The ones I have are brand New with the resevoir, bracket, new cap, strap to secure to bracket, and low fluid alarm. $40 a piece

nope, sorry

They are standard.

Only stock manifolds.

Just one. I'll call tomorrow.

sounds good.

I need 2 sets roller rockers and 2 sets pushrods ( 8.550 and 7.550 16 each )

What are the merlin heads ,condition&price?

Do you have a Bravo Gimble ring?

I have two sets of Stainless Marine bbc exhauts manafolds with the pipes. You can see them in this picture.
Make a offer. One has a rubbed spot on the side from the hatch lift. It looks bad but no leaks. I used them last year
they sound great and no water reversion with large cams.
Im looking for a used set of headers? Anyone..

Stainless Marine Exhaust.
 

Here is a (very bad) video of the exhaust. But you can hear them. http://www.youtube.com/watch?v=iAIO3ZJhcqI

Do you have crane roller rockers 1.7:1

Interested....pm price...

I have a set of Gold Series on ebay right now if you want to bid. The auction ends tomorrow and is at $110 right now.

I am the high bidder. They are yours

HP or Standard?

Merlin Heads
 

World Products Merlin Heads-a little rusty, came off a cobra 750, 612 cid, ported by Cobra (i think they were 320cc before porting), bronze guideliners, came off running, need beadblast valvegrind and assembly. Need to get $200 for the pair plus shipping.

I'll take the merlins if 3m passes.

How about the big chief? Price and condition?

Any jesel items - rockers or belt drives?

I have 2 pair of Stellings "GREEN" full length tubular headers, USED, fresh water use only with 4.5" o.d. straight tailpipes set up for Bravo, $4900 for both pairs---sent you a PM.

Standard Bravo 1 drive, 1995, let me know, Thanks!

Michael

Merlins, Big Chief Heads, and Jesel items
 

3m should work. I can send you pictures if you PM me your email.

Big chief heads-complete with titanium valves and retainers, came off 1200hp 653cid Sterling, 99cc chambers, 30 hours since freshened with valve grind and new springs, head gasket receiver groove machined, CNC ported and hand finished by Valako Race Heads, good working condition, only need valve grind and clean up cut to be ready to run. $ 2,500 a pair complete (no rockers) or $3,000 complete with Jesel rocker arms. plus shipping

Jesel rockers arms (for Big Chief Heads) can be purchased seperately for $650 per set. plus shipping

Don't have any used Jesel belt drives. Can get you a brand new belt drive with new solid upper pulley design for $799 plus shipping.

Bravo 1 Gimble Ring (for use with trim senders)
 

We have one. Should be used with right hand rotation prop. Was previously used with left hand rotation prop. and has wear in usual areas. Can send you a picture if you PM your email. $150 plus shipping.

500 efi cam
 

Got a 500 efi cam?

500 efi cam
 

sorry, no.

PM sent

How about Weldon fuel pumps? Thats a deal on the Chiefs. Put them on Racing Junk and raise your price by 50% and sell them quick........

No Weldon fuel pumps. Good idea on the heads.

Do you still have these heads?