Cleaning the Garage
 

I still have too much stuff taking up space. Making another list of available things for sale. If you don't see it, ask, everything is plus shipping and is open to offers.

1. 468 cu in short block, 20 hours on rotating assy, 8.5:1, no camshaft, comes with 12qt oilpan, balancer and flywheel. Stock crank, eagle rods, forged pistons. $1000.

2. B&M 250 Polished blower, dual 750 AED blower carbs, blower has 20 hours, carbs fresh rebuild, complete with Gaffrig flame arresters, linkage, fuel lines. Perfect with your cam, heads and the 468 above. $3000.

3. 2- 750 AED Blower carbs, fresh rebuild, $700.

4. B&M 250 blower dual carb top plate with linkage, $300.

5. B&M 250/420 Blower intake with stat housing, $250.

Items 6-12 are from a small block chevy project that never got around to finishing. Motor was being built to make 700hp for drag car. A package deal can be had on the small block items. $3500. Sorry I sold the heads, best part, dumb move.

6. SBC 4 bolt main block, .040 over, needs cleaning and a lite cyln. hone. $550.

7. SBC steel crank, 350, stock, might need to be cut, lite surface rust on one journal, $300.

8. NIB set of 8 SBC Venolia aluminum 6" rods, $400.

9. NIB set of SBC Venolia 13:1 pistons .040 for 6" rods above, complete with pins and rings. $500.

10. NIB SBC Lunati roller cam set up complete with cam, lifters, rev kit, roller rockers. Lost card but lift is in the .700 range. $1000.

11. New Edelbrock Victor Jr. tunnel ram intake with dual carb top, gasket matched to Mr Gasket ultra seal gaskets. Never bolted on an engine. $400.

12. Pair of holley 660 center squirters with rebuild kits and linkage. Kits need to be installed. $800.

13. 2- Gaffrig flame arresters for std flange holley carbs, 8" X 3", $250. for the pair.

14. 2- Eldelbrock cast aluminum timing chain covers, painted black, for Gen 4 type blocks. $50. for the pair.

15. 2- Sets of Crane stud girdles with poly locks, like new, $250. for the pair.

16. Drive trim pump, used, works good, reservoir is good. $150.

17. Hugh KPM strainer, polished aluminum with blue top, 6"X18", I used this in a 30' Scarab with the 2 468's no problems. It has 2- 1 1/4" intakes and 4 outlets, 2- 1 1/4" and 2- 3/4". $400.

I have alot more stuff to come. Lots of #16 and #20 AN fittings, bilge pumps, bezels, gauges, deck hardware etc. I'll post pics soon. If you don't see what you need, ask. THANKS!

Do you have any shifters / throttles? Looking for a single engine set up, or a twin that can be made into a single. I HATE my side-mount, it has to go! Let me know if you have anything you can part with for a good price.

Thanks!
-Artie

Sorry no throttles but there was a real nice set of singles on ebay. Was only up to $77. with a day left and a buy it now of $325. which isn't bad.

By the way, everything I have is for BBC except for items 6-12 which are SBC, Thanks!

Sent PM on timing chain covers.

Yes the timing covers will work with rollers and the button. They where used with rollers and buttons on the 468's. I'll try and get pics up tomorrow, Thanks! Bill

Sent you pm

Please ship pics of the 468 short block to [email protected].

Thanks, Lock

Thanks Fireboat, Just won them!

Pics from the Garage!
 

More pics coming!

More pics of the stuff!
 

More!