![]() |
Two Re programed Merc 500 EFI ECM'S for sale
I have two oem mecrury ECM"S for Merc HP 500 EFI motors that have been re programed for better performance on a basic stock motor and have a raised 5600 rpm rev limit in them now. I purchased these through Fountian Power Boats. These are in the original merc Quicksilver parts box # 840136T 2 . They have been used on my boat but I have sold the boat and no longer need them . I gained 3-4 mph and a much better idle it no longer blacked the hull like the oem ones did at idle. I will sell these ecm's for $ 450.00 for the PAIR including insured shipping . If intersted e mail me at [email protected] I will accept Check , Money Order or Paypal Thanks, Tom Jordan ecm's sold------sold-------sold!!!!!!!!!!!!!!!!
|
What are the numbers on the back? Not the serial number, but the one above it on the left hand side of the sticker.
|
Originally Posted by JasonSmith
(Post 3108073)
What are the numbers on the back? Not the serial number, but the one above it on the left hand side of the sticker.
|
Thanks, but I have some of those already.
|
Originally Posted by 2fast4u1
(Post 3108032)
I have two oem mecrury ECM"S for Merc 500 EFI motors that have been re programed for better performance on a basic stock motor and have a raised 5600 rpm rev limit in them now. I purchased these through Fountian Power Boats. These are in the original merc Quicksilver parts box # 840136T 2 . They have been used on my boat but I have sold the boat and no longer need them . I gained 3-4 mph and a much better idle it no longer blacked the hull like the oem ones did at idle. I will sell these ecm's for $ 450.00 for the PAIR including insured shipping . If intersted e mail me at [email protected] I will accept Check , Money Order or Paypal Cell# 336-260-4186 Thanks, Tom Jordan
|
Gained 4 mph? is this possible?
|
Originally Posted by JasonSmith
(Post 3108105)
Thanks, but I have some of those already.
|
Originally Posted by JasonSmith
(Post 3108105)
Thanks, but I have some of those already.
|
Sent you a email
|
Originally Posted by Mike A.
(Post 3108109)
:eek:
|
Originally Posted by dookie
(Post 3108141)
you have these already ? What did they do for you?
They are 3's which I have. The tune or program on them is of no concern to me. I'll wipe it out & do my own, which is what we did on the computers I have now. This same Delphi number ECM is used on TONS of stuff from GM crate engines to Mercruiser & Volvo powerplants. They are not anything "special" as just the ECM. As far as the 4 mph gain. I suppose if all the stars aligned properly it could be possible. Merc sets their stuff up on the rich side so by leaning it out & raising the rev limiter it is in the cards. |
Ecm's Sold! Thanks Guys
|
I have a set of recalibrated ecm's also if anyone needs them.
|
Originally Posted by Donzilla
(Post 3113247)
I have a set of recalibrated ecm's also if anyone needs them.
|
Originally Posted by JasonSmith
(Post 3113250)
Whatcha want fer'em?
|
| All times are GMT -5. The time now is 01:08 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.