BBC Solid Roller Cam, Lifters, Pushrods...
 

Complete set of Solid Roller Lifters, a Bullet Racing Cam billet cam, and complete set of pushrods for your big cube winter build.

Set has low hours, just under 59 hours out of a 598ci N/A JC Performance motor.

Cam Specs
Duration @ .050 262/272
LSA 112
Gross Valve Lift .697/.697

Have cam card if you would like a scanned copy of it.

I am not sure what brand roller lifters they are, but they are pretty much in perfect shape.

The Pushrods are pretty much perfect as well and measure as follows:
8 - .125 wall 8.950" long
8 - .125 wall 9.700" long

This set is ready to drop in and go in your big cubic inch build.

I dont really know how much this stuff is worth used, but am open to offers on it. I will seperate as well if you only need one item set.

Shoot me an email @ [email protected] if interested.

Disregard the time stamp on the pictures, I just took them today, didnt notice that the date was so far off. I can take new if you dont believe me.
http://i690.photobucket.com/albums/v...s/100_2790.jpg
http://i690.photobucket.com/albums/v...s/100_2792.jpg
http://i690.photobucket.com/albums/v...s/100_2800.jpg
http://i690.photobucket.com/albums/v...s/100_2794.jpg
http://i690.photobucket.com/albums/v...s/100_2802.jpg

ttt....

I know someone wants to build a big one, this will do it for you.:coolcowboy:

I have some interest in the cam only. What is the bottom dollar you will take for the cam?

Like I said, I really dont know what something like this is worth used. I guess it depends on what you want to spend. Make me an offer via PM or email and maybe we can work something out.:coolcowboy:

I want this stuff out of my garage, no sense in it sitting there going to waste.

Someone needs this stuff. Would make a sick cam for a blown 598ci.

cam
 

Are the lifters and cam for a gen 4 or 6?

They were in a Merlin III 10.2 deck block. These blocks are designed to be a direct replacement for the Gen IV blocks. I am not sure if they will accept Gen VI components or not.

Still for sale. Figure $200 firm for the cam, $200 firm for the lifters, $100 obo for the pushrods. Buy the whole set and get the pushrods for free. $400 + shipping takes it all right now. This is a deal for parts with that low of hours on them.

TTT....:coolcowboy:

Best Offer?? Am I asking too much or is this just a slightly narrow market item. These parts are pretty much perfect.