88 24' project boat
 

88 24' tahiti warrior project boat needs tlc but is excellent shape boat could be running in days needs engine and will sell with or without transom assembly and bravo drive. I am open to trades need exhaust carbs let me know what you got. Would anybody be interested in this running with a 454 bbc 420 hp with trs drive and transmission. I AM MOVING NEED THIS GONE NOT GONNA GIVE IT AWAY BUT CONSIDER REASONABLE OFFERS.

Thats a cool looking boat! Does it have an engine in it now? If so whats wrong with it? Looks like a Condore.

it does not have an engine but I do have a 454 420hp that could go in it. It is a rare boat I have been told hardin marine made it back in the day the y were bigger into small jet boats.

bump

what are you looking for out of it? $$$

Price?

how much with transom assembly?

without drive and TRANSOM ASSEMBLY $2500 WITH TRANSOM ASSEM. $3200 AND WITH ASSEM AND DRIVE $4000

Bump

bump

bump

bump

bump

Bump

Interested
 

What condition is the paint? Interior? Cuddy? Rot? Bravo drive?
Pls rate all on a 1-10 scale

Thanks
Lee

Tahiti
 

What is the beam?

Tahiti
 

There is no rot what so ever the floor was completely redone in 2000 but had only seen the water 3 times since then. interior needs to be redone for the most part the bolster seats are a 6 bench seat 6-7 sun pad was rotted so I made a new one but have not recovered it. cabin is probably a 7. not sure if you could tell from my pics but the windscreen needs to be finished. it has a bravo drive but not sure if I am selling it with the boat yet. I was redoing this boat, I put my blower motor in it and ran it one time brought in checked the filter and found metal in it, pulled the motor tore down and found nothing wrong with it at that point I lost interest.

Beam??? Exterior paint/gelcoat??

I think it has 8' ft beam the gelcoat needs to be wet sanded and buffed. I wet sanded and buffed a corner of it and shined up nicely. honestly it looks like it needs a lot of work but if I had a week I could have it together.

Bravo
 

How much for the complete bravo assembly (bellhousing back)
What condition?
Sorry on the boat, really want a 24x7

Lee

It maybe 7 I'm not sure I'll check when I get over where it Is. It is a big 24' boat next to my 97 29 scarab it was the same size minus molded swim platform. With stock 330 hp ran about 60-65mph

I think 7'6" maybe

Separate?
 

How much for complete bravo drive assembly??

ttt

ttt

ttt

ttt