Pair of 502 EFI's
 

I have a pair of 96' model 502' EFI's that I'm looking to move to fund my new builds. They have approx.350 hrs on them.1 runs good with no issues.The other one still runs good but has signs of copper in the oil filter.It still has oil pressure and has never run hot and it doesnt knock ...I'm not sure what bearing is starting to fail.They are still in the boat and can be ran for you to inspect.Price is for the pair with with everything execpt exhaust.$6000.00.I can email pics.Thanks

Bump..no One Interested In These??

motors
 

do you have pictures

yes, i will have to e-mail them though..

send pics to [email protected]

Pics sent...

fresh or salt water,does that include the comp and harness,any pic's mail me [email protected] thanks john

yes comp. and harness' included..i am going with carb set ups..I have only ran them in fresh water...the gentleman i bought them from said that he ran them in brackish(not sure if thats spelled right)water...They came from Edgewater,MD..

pics too please [email protected] thanks

pm sent

pics to [email protected] please

ttt...I took a short video with my phone of each engine running,I can text them to anyone interested..I can also e-mail them,but i'm not sure what video format it will take to view them..

engines sold..deposit recieved...thanks Erik

whats the set up your going with,I have a 33 Eliminator with big power and its a hand full

I'm not going very big...I am doing some 509's with edelbrock alum.heads and some single carb 250's...at least thats the plan for now...I'm hoping to get 600-650 hp.What are you running?Big power..Hand full..sounds like fun..

632 tall deck darts sonny brodi heads 5 stage dry sumps sonnys tunnel rams with johnny kyle 950's,cmi big tubes.

they dyno at 955 each
Dry sump #6 drives spining 132 gears and 16/3/4x35 four blade mercs

:eek: 955HP a side...that ought to do it..135-140??

135 so far theres more in it

Just curious did APD do your engines, or just carbs?

Do you know johnny? he has done a few carbs for me in the past allways good work.

Yes, I know John through drag racing. John built my last drag engine, so i recently had him build a new engine for my boat.
John is real good guy, builds good power. Also very good with carbs.

cool small world,so you do you know Scott at Gressmans and Bob at Fall auto and mech,I deal with both those guys a lot.
The best in the area hands down.

Yea, it gets smaller every day. I met Scott a few years ago, we dynoed my 665 at his shop. I have never met Bob. I just got my 598 for the boat home off John's dyno at his shop. I'm not from that area, I live about 140 miles north.