Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Swap Shop (https://www.offshoreonly.com/forums/swap-shop-253/)
-   -   525 efi parts (https://www.offshoreonly.com/forums/swap-shop/246001-525-efi-parts.html)

smokin' gun 01-19-2011 09:20 PM

525 efi parts
 
have a few brand new 525 efi parts .never used simply removed from the motor to make it a carbed motor

these parts are all new never run

have the cool fuel system. fuel pump and lines .seen in pics 235.00 tyd

1 set plug wires 40.00 tyd

block adapter w thermostat for oil lines 135.00 tyd

2 coil packs 125.00 each tyd or the pair 200.00 tyd

have the dist plug and reluctor wheel

1 ideler wheel and bracket and misc sensors

looking for reasonable offers


i do have another 525 efi for parts that has good block 1 comp set of heads (alum 525s ) 2003 model .8 new 030 pistons and rods 525 s .and a set of 525 efi valve cvrs . cam lifters pushrods rockers ect .motor was rebuilt w 4 hrs and developed a noise .will be here in 2 weeks

smokin' gun 01-19-2011 09:22 PM


Originally Posted by fastek (Post 3302030)
have a few brand new 525 efi parts .never used simply removed from the motor to make it a carbed motor

have the cool fuel system. fuel pump and lines .seen in pics

1 set plug wires

block adapter w thermostat for oil lines

2 coil packs

have the dist plug and reluctor wheel

1 ideler wheel and bracket and misc sensors

looking for reasonable offers


i do have another 525 efi for parts that has good block 1 comp set of heads (alum 525s ) 2003 model .8 new 030 pistons and rods 525 s .and a set of 525 efi valve cvrs . cam lifters pushrods rockers ect .motor was rebuilt w 4 hrs and developed a noise .will be here in 2 weeks

more

asmith 01-19-2011 09:26 PM

I need a set of the connecting rods. What do you need to get for a set? Thanks Allan
[email protected]

cliff_m_b 01-20-2011 12:52 AM

I am interested in the block adapter with thermostat for oil lines do you know what you need for it? Also will you have another one for sale off of the other engine you will be getting in? If so I would be interesed in getting both of them.

Thanks,
Cliff

oceanoutlaw 01-20-2011 06:54 AM

PM sent

smokin' gun 01-22-2011 06:36 AM

bump

bullittcustoms 01-22-2011 01:56 PM

Do you have a power steering pump, pulley and cooler?

Derek

smiklos@sunprint 01-22-2011 02:52 PM

How much for fuel cool?
Thanks
Steve

smiklos@sunprint 01-22-2011 02:54 PM

Do you have the manifold that the heat exchanger sits in?
Thansk
Steve

smokin' gun 01-23-2011 05:14 AM


Originally Posted by smiklos@sunprint (Post 3304448)
Do you have the manifold that the heat exchanger sits in?
Thansk
Steve

only have what you see in the pics


All times are GMT -5. The time now is 08:59 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.