I was thinking a Cobra...

1075
 

guys iam dead serious, i have a 25 talon and i have a 600ci with 1471, dom, and with 16lb pully,it makes more hp than the 1075 if not as much, and i have access to 1 of these motors for cheap and was going tom try it, if wondering about drive its a max machine full billet, this was not a joke ???

those poor small whimpy bravo parts.
 

All that power to such a small prop, punish your prop!!

They are all serious !!!!!!

If your making as much power now,,,,,then why ask? ( not sarcasm )

I agree. But a drive shower will be mandatory. And be sure to check the steering cable for any slack. :party-smiley-004:

I call BS..... but if you're absolutely dead serious (still think you're hittin the pipe WAY too long) you need to get a BMax ....

got any pics of this project? - I'd LOVE to see it!

My Bravo-1 Lasted only one day with less than 800 hp, I did accidently air it out a few times without getting off the stick that day. oops

this might be a great question for P@werboat Magazine /Teague on Tech section :lolhit:Bob might even do the testing :eek:

What drive did you end up going with to handle the 800hp after you broke it?

Brad

To be straight with you. You can do it but your problem is that the more pitch you put to the drive creates more tork and force on the gears. Some people will increase the rev limiters so you can put a smaller prop pitch lowering the stress. This will however increase rpm for overall high speed performance of your motor. You will have to spin that prop faster Rembering 1 pitch is apx 200 rpm change.