Merlin Cast Iron Heads
 

Two Pair of Merlin Cast Iron MARK IV HEADS ready to bolt on New never used. Bronze guides, Harden valve seats, manley severe duty stainless 2.30 intakes, inconel 1.88 exhaust, 345 intake runner, 3/8" valve stems.
Springs set up for hydraulic roller cam. One pair of the heads have the extra holes drilled for the inside head bolt for the Merlin or Dart blocks. $ 2500 for both sets, plus shipping.
Harvey 252-339-4560

I'm currently waiting to see if my old heads are good. If they're not I would be interested in one pair. pics to [email protected] please

One set of the heads have the extra holes drilled for the inside bolts under the intake.

Will separate. 1300 a set plus shipping

Both sets 2300.00 plus shipping.

Ttt

ttt

Can send pictures on request.

What springs are included?

Set up for hyd roller cam with 150 -160 lbs. seat pressure.

Ttt

Ttt

Someone must need a new set of heads.

Ttt

ttt

Merlin Heads
 

These heads are NEW ready to bolt on. Someone with salt water cooled heads must being working on their engines. Someone make a decent offer. 2300.00 for (4) NEW Heads, 2 sets.

heads
 

2000.00 shipped to fl 33762 ??????

2000.00 plus shipping, in boxes ready to ship.

what part number are the heads?

The reason I ask is I have gen 4 blocks, was going to use some gen 5 heads from some 502's I am parting out but I hear too much about cooling properties.

Have pictures of NEW HEADS. Ready to ship.

send pics to [email protected] please

heads
 

i'm still in at $2000.00 shipped to 33762??

Ovals or Rec ports?

Rec port

ttt

One set of Merlins Cast Iron Heads. Six minutes run time on dyno. Sold other set. 1,100.00 plus shipping.

heads
 

pics to [email protected] please

Merlin Cast Iron Heads
 

Six minutes run time on dyno. I will accept PayPal. $ 1,100.00 plus shipping.

ttt

heads
 

1000 shipped??