Hynautic Helm Pump
#2
Registered
Join Date: May 2006
Location: Cape Cod
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
Would this be for a single ram (single engine) or twins? What would be required in addition to this helm pump to convert a boat that has "hynautic" (cable to transom, then hydraulic assist) to full hydraulic?
#3
Registered
Thread Starter
iTrader: (4)
You would need external rams, Pressure Reservoir, relief valve or a Hynautic Reservalve that combines both. You can find them on ebay or I have seen a couple in the OSO swap.
http://teleflex.ru/upload/files/cata...d-Hynautic.pdf
http://teleflex.ru/upload/files/cata...d-Hynautic.pdf
#4
Registered
Join Date: May 2006
Location: Cape Cod
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
So if the boat already has external rams fed by the power steering pump, would you eliminate the power steering pump in a full hydraulic system? In other words, you turn the drives by hydraulic pressure without using a mechanical pump to assist you?
Sorry for the dumb questions.
Sorry for the dumb questions.
#5
Registered
Thread Starter
iTrader: (4)
No dumb questions. The helm is an actual displacement pump (I think it is ~1000PSI). You disconnect your steering pump and cylinder from the back and plumb directly to the cylinder with the Reservalve in place. These are used more in outboard application then I/O cause they lack the power steering pump. I did have it on my I/O though.