Cleaning out the Garage
 

If any one is interested I have two sets of CMI E top exhaust polished tops complete with 5" tail pipes and air actuated mulllers, Fresh water only less than 75 hours no leaks perfect condition came out of a side by side Scarab $ 5,000 OBO. I have a set of Dana marine tims tabs with through hull fitings no pumps , great shape same lenght as 280's an inch narrower $ 800,OBO.Both prices do NOT include shipping.
If you are interested I can email you pictures.
Rick G.

Please email some pics of the tabs to [email protected]
Do they come with the actuators or gauge?

Jeff I will send some pictures tonight when I get home. The actuators are mechanical and are still in my boat , as I went to a keikifer 380 tab setup. Nothing wrong with the Dana I just went to a bigger tab.
RG.

I am interested in one set of headers and tails. Pictures to [email protected]

How old are they? Rope seal or flex flare?

Rick,
Please email or PM me pictures of the exhaust and mufflers.
Phil

Arandaz they are the flair style with the clamp I would prefer to sell them as a pair but will not rule it out . They are 3 years old but I did run the boat at all last year the mufflers are about 8 to 10 years old but are in great shap except for soot I didn't clean off in 2009.
Phil will do.
RG.

Would you sell the mufflers seperate? I assume these are the CMI ones that as you increase pressure they open.

Also I have a friend looking for a set of CMI Etops with tails if you'll split them up.

Sorry the mufflers are air actuated. Unfortunately I still need the air pump.
RG.

Hey Rick. Are the tailpipes dry? Was the scarab a bravo boat or TRS/SSM setup? If they are the long TRS/SSM style risers i may be interested in both pairs of exhaust.

Pics to [email protected] would be great...Thanks...Joe

The Scarab had my 605's matted to number 3 ssm drives .
The pipes are not dry . I will try to get some pics up tonight that will show what I have .
RG.

Was there a issue fitting them into your flatdeck 38? BC thats what they would be going into...a 1986 Flatdeck 38 Cig with ssm IIIA drives.

Shoot me some pics to my email when you can...might have a stock engine hatch and radar arch for your boat if your interested! :drink:

hey rick where's my advertising??? AKRacing 605 cid's thank you very much!!! lmao

I don't particularly want the mufflers so you can sell those to him. I just need headers/tails.

What do you think? You should have no problem selling headers this time of the year.

Rick,
I'm looking for a Bravo setup so no need for the pictures.

Okay Phil

Mild Thunder, did you get the pictures? Thanks for the offer but i have never been a really big fan of arches and my engine hatch is a race style and I think I am going run that for now.
Rick G.

Hey Rick, just missed ya. Left you a message.

Actually would like to chat about those race hatches you have also..building a new set of hatches shortly...

Do you still want to sell (1) set of headers/tails?

I am talking to some one who may be interested in both sets, if it falls through I will get back to you.
Rick G.

Hey Rick, your ciggie gonna be in the water this summer?

ABSOLUTELY , I have been working like a mad fool to get it done. I am redoing the cockpit wood and upholstery , changed out the Dana trim tabs with Keikifer's , Made a cockpit step to access the deck , Installed a battery charger and shore power and some cool AC lights in the bilge and the list goes on and on. I will be keeping at Bonnie boats in Jackson's point.
Rick G.

ttt

Are you ready to split yet?

I know someone looking for 1 set cash in hand.

hey inrested in the trim tabs whats is the size i need the 12 wide x 18 long at least

I am attaching a few pictures and take some measurements tonight.

Sorry didn't upload

interested in all four tails, you have any pics??? where does the water dump