Big Block Chevy Parts
 

gen4 oil pan $35, damper$10,aluminum timing cover$10,flywheel$30, remote oil filter housing from block$10, gen 5 stock aluminum valve covers$15, p/s pump$40, sea pump w/ fuel pump attached and separator housing$70, ... Dart high rise single plane manifold [rect. port]$45. Edelbrock dual plane manifold[oval port] with Edelbrock 750 carb$100. Crower roller lifters not complete set have 14 two pair rollers have marks,$40 Crane roller rockers have 15 $35, Scorpion roller rockers have 14$35,p/s alt. bracket $15, 2 sea pump assemblies,with bracket and pulley 1 good 1 needs bearings$70,$40, oil coolers 2X6 $25, 2X11 $40, oil/p/s 2X9 $45,2 water pump pulleys 7" dia.$25 each, steel crank pulley$15, 3 stainless crossover pipes 2complete kits match w/therm. housing and stainless braided line$150 each, 1 to run with no thermostat $75, Eddie marine exhaust manifolds and aluminum risers [fresh water use except 1 season] $375, Bravo 1 lower [older style] no corrosion boat was trailered $325, Hardin marine clamp on mufflers mint cond. $80, Hardin marine stainless shorty headers with dry pipes used 8hrs. mint cond. $2200

I'll take crossover and stat housing with bypass

All so interested in timing cover and valve covers and edelbrock intake sent u a pm

pullies
 

What style and how many groves do they have.

I need a three and a two grove pullie

Steve

il take the dart singel plane manifold.

how many qts does the oil pan hold,if 8 or more,il take it.

Ill take the dart intake 502-460-13twelve

Can you send pics of exhaust to
[email protected]

I'll take these:
remote oil filter housing from block$10, p/s pump$40,p/s alt. bracket $15
I'll PM you about payment and shipping.
Also interested in pictures of the Hardin mufflers.
Phil

Ill take a t stat crossover [email protected]