Imco Scx Complete With 1.24 Sc Lowers Smoking Deal
#1
Registered
Thread Starter
Join Date: May 2009
Location: Kelowna BC canada
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
Imco Scx Complete With 1.24 Sc Lowers Smoking Deal
2 black imco scx drives complete with sc -2 lowers with 1.24 gear ratio. 45 hours on uppers and 20 hours on lowers. both lowers have new teague 1.25 propshafts. 6500 firm for each drive. will not separate uppers from lowers. will sell complete drive individually. drives are located in Kelowna Canada. Buyer is responsible for shipping.
#3
Registered
iTrader: (3)
2 black imco scx drives complete with sc -2 lowers with 1.24 gear ratio. 45 hours on uppers and 20 hours on lowers. both lowers have new teague 1.25 propshafts. 6500 firm for each drive. will not separate uppers from lowers. will sell complete drive individually. drives are located in Kelowna Canada. Buyer is responsible for shipping.
#6
Registered
Thread Starter
Join Date: May 2009
Location: Kelowna BC canada
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
#7
Registered
Join Date: Feb 2008
Location: Greenwood, Arkansas
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
I have the WPM (Warlock) standoff boxes, which accept the standard bravo 1 shaft length. Would this be a problem converting these to a smaller shaft? At present the boat has XR drives and breaks at least one per season. My steering bracket is presently seated between the upper and helmet. If this would work, I will probably buy them from you. Thanks... Bob Mulac