sold

Bell housings, exhaust tips, 1 strainer set-up . sold

more swim platform pictures.

gottem & thanks again BIG Daddy .....




ROCK ON !!!!!!!!!!!
ITS A SKATER NATION !!!!!!!!!!!!!!!!

Hi Tom,
If you still have the drive plates do you think they would be OK to use with a couple of 600hp engines? Also if you haven't sold the Swim PF - shipping to 49675. Probably pretty pricey but if you get a chance I would appreciate it.
Thanks,
John

Tom,

Looks like the brackets are located at 26" & 42" from the outside of the platform? I take it the brackets are symmetric! what's the thickness of the actual platform? As you can see by my photo, I don't have a lot of space between the rub rail and the top of the exhaust.

http://i69.photobucket.com/albums/i4...b/a042a119.jpg

John, 600 would be no problem for those drive plates. I ran the same ones in my cig with 600 hp for 7 yrs. will get you a price on shipping on the platform. Tom

yes, the brackets are symmetrical. I will get u the thickness tomorrow. Tom

i will take the drive plates. just let me know the sipping. also when time permits appx shipping on spf.
thanks,
john

ok will do.

Thickness of the platrom is 1 3/4 inch.