Parting out 2 420 Mercs
I needs some parts of these engines. I took what I needed and now just selling off the rest of what is left. If some one is looking for something it may have it. One engine sucked water other came out as a runner from what i was told.
-Mike |
I need an oil filter head mount bracket with adaptor that the filter spins onto. This is the type that mounts to rear of port cylinder head. Also need the brackets to mount the oil cooler to rear of bellhousing. Do you have these?
|
I'd be interested in the valve covers if there in good shape. If you have them would you send pics to [email protected]
Might be interested in the intakes as well. |
En I'll send pics now also I can make up some .468s with 990 square heads 420 cams 1 piece hd pushrods crane gold roller rockers imco power flow exhaust with risers
|
5 Attachment(s)
A few pics
|
5 Attachment(s)
couple more
|
Last 2 pics. the last pic its self is one of the short blocks I can build up to make a 468 modded 420
Fuel Water seperators filter heads with brackets 40 each 75 both shipped. 990 Rec, heads decent shape 350 2- Gen 4 TRS flywheels with couplers 125 each 4 sets- crane gold rockers 125 a set shipped 2 sets - Gen 4 430 Valve covers finned 75 a set Holley 9022- 800 cfm carb 175 flame arrestor - 80 shipped Factory dist with cap and wires - 75 shipped thunderbolt 4 box 50 shipped |
mike ill take that carb . let me know how you want payment
|
Hey Gordon 125 to you door and I'll give you the carb spacer also if you want it and if you need any other odds and ends I'll throw those in you hooked me up plenty
|
is the air cleaner avail also . by the way your parts i sent should be there already if not it will be today .let me know if you need anything else
|
All times are GMT -5. The time now is 08:58 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.