![]() |
Gen VI BBC parts
5 Attachment(s)
All parts are off Gen VI 502 BBC's.
New engines are going to be fuel injected so changing most accessories out. Not sure what this stuff is worth so if you're interested in something make an offer and we'll take it from there... 2 - raw water/fuel pump accessory brackets (can sell complete with raw water pump, fuel pump, idler/tensioner and fuel water separator or piece it out if needed) 2 - GM distributors with MSD plug wires 2 - Imco valve covers with breathers. As you can see two of the breathers are damaged but the pipe they fit on is fine, so just replace the breather and you're good to go. They have been clear coated so they look worse than they really are, probably just a sand and buff and you're set. More in next post... |
5 Attachment(s)
2 - Holley Red electric fuel pumps and -8 lines and fittings. Both work fine
1 - 525SC flame arrestor with breathers, all in good condition, no problems So let me know what you need and let's deal :evilb: |
how much for one set of the valve covers?
|
Originally Posted by TooTall
(Post 3650121)
how much for one set of the valve covers?
|
How much for one of the seawater pump setups?
|
How long are the fuel lines, how many fittings and how much for both sets?
Thanks |
All PM's returned
|
not really
|
Not really
+1 |
Sorry guys, last min trip to Tampa for PR, I'll get back to everyone tomorrow night or Monday. Thanks!
|
| All times are GMT -5. The time now is 05:32 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.